DVD Module 04 E 2.
DVD-Modul MK4 Re:source Contents DVD Module Perfect picture – DVS Module Installation 2 2 3 SCART connection panel SCART assignment 4 5 RCA plug connection panel RCA connections 6 6 Video switch principle M300 connection options M301 connection options 7 8 9 DVD-CD generally DVD menu DVD/CD operation Repeat function Shuffle function 10 11 12 13-15 16 DVD Setup menu General Setup Page Audio Setup Page Video Setup Preference Page 17 18 21 21 23 Page DVD Setup menu Selecting the video format RGB
DVD-Modul MK4 Re:source Perfect picture – DVS Module DVD module Together with the M51 (from SN 4000), the new DVD MK4 module offers you for the option to support a DVS module. This DVS module is a Digital Video Sclaer that transfers the digital video data perfectly, directly from the DVD drive to a digital picture output device, e.g. the Re:ception 42 HD Plasma TV from Revox, with HDMI interface. The DVS module is installed parallel to the DVD module in Slot 4. The DVD Module MK4 (1.551.083.
DVD-Modul MK4 Re:source Installation To be on the safe side, you should discharge any static from yourself by touching an earthed metal object such as a radiator. The DVD plug-in card has the most modern technology on it and should be handled with care. Before you start to install the card, the M51 must be switched off and the power plug must be removed from the power socket.
DVD-Modul MK4 Re:source SCART connection panel SCART connection The DVD module is available with two different back panels. All commonly used video and audio formats can be handled through the SCART connector (marked as AV-Link). The pin assignments conform to the international SCART standard. The standard module represents a fully switched SCART version. The DVD module can be connected to your television, video recorder or other video components using the SCART to SCART cable supplied.
DVD-Modul MK4 Re:source SCART –Assignment M51* (1) Audio output (right) (2) Audio input (right) (3) Audio output (left/ mono) (4) Audio earth (5) RGB blue or V earth (6) Audio input (left/ mono) (7) RGB blue or V output (8) Switching voltage 12V/ 16:9 (9) RGB green or U earth (10) Data cable 1 (11) RGB green or U output (12) Data cable 2 (13) Digital output The digital audio signal can be taken from the optical digital output DIGITAL OUT using a fibre optic cable.
DVD-Modul MK4 Re:source RCA plug connection panel RCA connections A RCA plug version is also available, which outputs the audio and video components individually through RCA sockets.
DVD-Modul MK4 Re:source Video switch principle A separately available video switch can be connected to both the SCART version and the RCA plug version of the DVD module. Connecting a video switch adds an additional 6 video sources (Video 1...6) to the M51 Source menu. The M51 takes over the complete control of the video switch. The audio signal from the video sources attached is transmitted by the M51 whereas the picture signal is handled by the video devices attached, such as TV, video projector, etc.
DVD-Modul MK4 Re:source M300 / DVD-SCART connection options 8
DVD-Modul MK4 Re:source M301 / DVD-RCA connection options 9
DVD-Modul MK4 Re:source General Inserting the disc The actual control of the different discs is done through the DVD menu. You can find details of the formats that are supported in the Technical Data on the last page of this manual The CD drawer is opened by pressing the Disc button on the front of the M51. Insert the CD/DVD, with the reflective side down taking care to center it in the circular recess in the drawer. You can play 8cm mini CDs as well as the standard 12cm CDs.
DVD-Modul MK4 Re:source DVD Menu The Track number and the current playing time are displayed. The top line also shows whether a CD or a DVD is currently inserted. In this case it shows the text CD. If you have already opened the DVD menu, the disc will start to play as soon as the CD drawer is closed. If you have not yet opened the DVD menu, you can get to it as follows: The DVD/CD player is accessed through the Source menu. Press the Source button on the M51 and then press the DVD/CD softkey.
DVD-Modul MK4 Re:source DVD/CD operation Change track Several commands are available to give you quick and easy operation of your CDs and/or DVDs. Using the two "previous" and "next" Track softkeys, you can jump to the start of the previous or next Track on a CD or Chapter on a DVD. Play Example You are currently listening to Track 4 on a CD and you want to jump to the start of Track 3. In this case you need to press the "previous" Track softkey twice.
DVD-Modul MK4 Re:source Search Repeat If you want to search for a particular position within a Track or Chapter, you can use the Search function. This function has two search speeds. The Repeat function enables you to repeat and individual Track or the whole CD. With DVDs, you can choose between three repeat options, Chapter, Title or the complete DVD. The first time you press the Search softkey, the play speed is accelerated in a single step.
DVD-Modul MK4 Re:source Repeat CD The various CD Repeat functions can be selected by repeated pressing of the Repeat softkey. This takes you through a loop which is ended when the Repeat function is deactivated. If you press Repeat again, the whole CD will be repeated once. Then the CD stops. This is shown in the display with the text: Repeat Disc A further press on the Repeat softkey ends the repeat function.
DVD-Modul MK4 Re:source Repeat DVD As with the CD, the three DVD Repeat functions can be selected by repeated pressing of the Repeat softkey. This takes you through a loop which is ended when the Repeat function is deactivated. If you want to repeat a whole DVD , press Repeat once more. This is shown in the display with the text Repeat Disc Repeat Track Repeat Disc Repeat Off A further press on the Repeat softkey ends the repeat function. The following graphic shows the repeat functions with a DVD.
DVD-Modul MK4 Re:source Shuffle Stop With the Shuffle function, you can play your discs in a random order. The Shuffle command is on the second page of the CD/DVD menu. The Stop softkey stops all actions in the DVD menu and stops the disc currently being played. In the case of a CD, the following display in Stop mode shows the total playing time of the CD and the number of tracks. Shuffle can be started in Stop- or Play mode. In both cases, the random selection is started immediately.
DVD-Modul MK4 Re:source DVD Setup menu The following screen appears when the menu is first called: As well as the DVD menu, there is the DVD player Setup menu where basic and global settings can be made. The Setup menu is precon-figured by Revox and should only be changed if really necessary. Select the DVD source at the M51, switch the television on and press the OSD or Setup button on your remote control.
DVD-Modul MK4 Re:source General Setup Page Disc Lock Using this option, you can block individual discs, even if the disc does not have any age level limits. Lock The Lock option activates the disc block. You have to enter the 6-digit password before starting the disc the next time. The general Setup menu offers you basic settings for the most important functions. Unlock The Unlock option lifts the block on the disc and allows you to play it in the future without having to enter the password.
DVD-Modul MK4 Re:source Program Using the TV screen, you can group certain CD/DVD titles within one disc together. This type of programming is only visible if the TV or projector is switched on. Programme start The programming that you define is stored individually on each disc. The M51 can store up to 100 CD/ DVDs. The program is only started in the sequence that you defined, if the disc is started from the Program menu item.
DVD Module MK4 Re:source OSD language The OSD menus appear in the language you selected. This has no influence on the language that a DVD is played in. The preferred language to be used when playing a DVD is set through the Preference Page. Sleep Using the Sleep timer, the M51 can be switched off automatically after a preset time of 15, 30, 45 or 60 minutes, when a CD/ DVD is operating. Select the required time period and confirm that with the OK button on your remote control.
DVD Module MK4 Re:source Audio Setup Page Video Setup Page The Audio setup menu can be selected but the settings do not have any effect on the audio part of the M51. Revox generates all analogue and digital audio signals on a separate SDTV board that is located above the drive. This guarantees that the audio quality and format are adjusted perfectly to the requirements of the M51.
DVD Module MK4 Re:source TV Display Through this menu, you can adjust the M51 DVD player’s screen format to that of your television. The format you select must be available on the disc. Otherwise this setting will not have any effect on the play format. 4:3 Pan Scan Crops the screen right and left to the full height of the screen. 4:3 Letter Box Plays the full screen contents, with a black border top and bottom. 16:9 Shows the full screen contents if the TV can also support this picture format.
DVD Module MK4 Re:source Preference Page Audio Through this menu item, you can define your preferred language choice when playing a DVD. If this language is not available on the DVD, the default language from the DVD will be used instead. Subtitle Subtitles will be shown in the language you selected, if they are available on the DVD that has been inserted. If this is not the case, subtitles will be displayed in the first language defined on the DVD.
DVD Module MK4 Re:source Parental This setting allows you to define which DVDs may be played back. If you select a level from 1 to 8, discs and scenes with the same or a lower level will be played back. Higher rated discs or scenes will not be played back, unless you enter the release code. Select “0” to deactivate this feature. Some DVDs have a child lock, which allows you to restrict the playback in full or in part or to playback with alternate scenes.
DVD Module MK4 Re:source PBC Password PBC is the Play Back Control, which starts the interactive menus on the DVD that are prescribed by the manufacturer. Without PBC, the tracks are played in the order they are found on the DVD. You can define your own personal release code to replace the standard 000 000 password using this menu item. Call the menu item Password using your remote control. Enter the currently valid password using the numeric keypad on your remote control.
DVD Module MK4 Re:source Setup-DVD menu Selecting the video format The M51 DVD module can generate different video formats for picture reproduction through different media. One of the following displays appears: Through the Video Mode function, the DVD module makes four different formats available at the SCART and/or RCA plug connectors.
DVD Module MK4 Video Mode: Re:source RGB+CVBS As shown by the + sign, this mode contains two signals that are sent at the same time. Video Mode: RGB Video Mode: CVBS SCART version This is the standard signal for many video projectors (Beamers) and televisions. In this case, the video signal is represented through the three primary colours Red (R), Green (G) and Blue (B). These three colour signals can either be transmitted using the Revox-SCART cable or a special SCART-RGB cable.
DVD Module MK4 Video Mode: Re:source Y/C/Cr/Cb This signal also contains two signal forms, which can be output in parallel. Video mode: Y/C Video mode: Y/Cr/Cb This video format is also known under the name S-VHS. It is an analogue video signal that processes the luminance (brightness) part Y and the chrominance (colour) part C independently of each other, which allows a higher resolution and colour fidelity.
DVD Module MK4 Re:source DVD Lock You can deactivate the DVD/CD control in an additional room with the DVD Lock function key. This ensures that no-one in another room can interrupt the DVD reproduction, while you are watching a film in the main room. If, on the other hand, a CD is inserted in the M51, the function has no effect on the control. The function is called by pressing the DVD Lock softkey. Repeated pressing of the key toggles between switching the function on and off.
DVD Module MK4 Re:source Technical data Usable formats DVD Video (Single and Dual-Layer) DVD+R, DVD+RW Video CD (VCD) Super Video CD (S-VCD) Audio CD ( incl. CD-R,CD-RW) MP3-CD ( incl. CD-R,CD-RW und DVD+RW) JPG-CD ( incl. CD-R,CD-RW und DVD+RW) TV Standards: Multi-standard PAL (Europe) NTSC (USA) Video signals: Configurable in SETUP CVBS S-Video Y Cr Cb Digital Out: PCM Plug connection 1.0 Vpp at 75 Ohm SCART/ RCA Y: 1.0 Vpp at 75 Ohm C: 0.7 Vpp at 75 Ohm SCART/ RCA SCART/ RCA Y: 1.
DVD Module MK4 Re:source Notes Guarantee Manufactured under license from Dolby Laboratories. “Dolby“, “Pro Logic” and the double D-Symbol are trade-marks of Dolby Laboratories. The guarantee period is 24 months from the date of purchase. Your dealer should be your first contact if you need service. Manufactured under license from Digital Theatre Systems, Inc. US Pat No. 5,451,942 and other worldwide patents issues and pending.
DVD Module MK4 Re:source DVD-Module MK4 Operating instructions / Part no.: 10.30.
