Technical data

M219 MK2 Re:connect
4
Safety measures
Read and take note of the following
safety advice for your own safety and
to avoid unnecessary damage to your
equipment. Please keep this safety
advice in a safe place for future
reference.
Avoid locating the unit in a position
which:
- is exposed to direct sunlight
- is directly next to a source of heat
- has poor ventilation
- has a dusty atmosphere
- is unstable
- has high humidity
The guarantee covers intended usage
of the device.
High build-ups of dust and humidity
cause creepage current in the device
that can cause a risk of shocks when
touching the unit or lead to a fire.
If you have moved the unit from a cold
to a warm environment, leave it
switched off for about two hours
because of a possible build up of
condensation dampness.
You should always switch your M219
off before connecting or disconnecting
other devices or speakers.
Protect your device from:
- Damp, dripping water and splash
water, steam.
- Knocks and mechanical loads.
- Magnetic and electrical fields
- Cold, heat, direct rays of the sun
and severe changes of temperature
- Dust
- Access to the inside of the device
- Do not stand any articles with open
flames, e.g. lit candles on the
device
Safety symbols
Take note of the label on the back of
the unit.
This symbol warns of “dangerous
voltages” within the unit. In the case of
contact with the corresponding
components, the level of voltage can
cause an electric shock.
This symbol indicates important advice
for operation and maintenance in this
documentation.
