Technical data

M219 MK2 Re:connect
13
M219 local inputs
See description: [1] LOCAL IN 1 2 3
Number of local
inputs
DIL switch
4
DIL switch
5
DIL position
0 Off Off
4
5
1 Off On
4
5
2 On Off
4
5
3 On On
4
5
M219 addressing
If you want to control each M219 individually, to use the alarm function of the
M51 T
imer , for example, it is necessary to assign each M219 its own address.
The maximum number of M219s is limited to 8 per zone.
All M219s must have different addresses within one zone as otherwise there may
be communication problems.
The revisal of a correct addressing is made in the Setup menu of the M51,
category
Multiroom / Version . All attached devices (M219 and/or M217) must be
listed in the respective zone. See also page 2 –
Multiroom Planer V2.00
Address
DIL switch
6
DIL switch
7
DIL switch
8
DIL position
1 Off Off Off
6
7
8
2 Off Off On
6
7
8
3 Off On Off
6
7
8
4 Off On On
6
7
8
5 On Off Off
6
7
8
6 On Off On
6
7
8
7 On On Off
6
7
8
8 On On On
6
7
8