Technical data

M219 MK2 Re:connect
12
Please note: SCART sockets
Many devices such as SAT receivers, video recorders or DVD players output
a switching voltage through the SCART socket as soon as they are switched
on.
On a standard SCART socket,
PIN 8 outputs the positive voltage (+) and PIN 4
or
14 is the earth (-).

The principle of Master/Slave socket outlets
With this type of socket outlets, the control device (the TV in the above example) is
plugged into the master socket while all other devices are connected through the
slave sockets. As long as the master device is not switched on, all slave sockets
remain switched off. Once the master device is switched on, all the slave sockets
(the plug-in power supply in the above example) are switched on at the same time.
In this way, you can “upgrade” any type of device to give it a switching-voltage
output.
Cabling: Voltage input IN
1432 5678
1432
PRE
OUT
SETUP
M219
LINK
CHANNEL
SELECT
IN OUT + R - - L +
MR-BUS SPEAKERS
230V / T0,5A L
115V / T1A L
LOCAL IN
L
R
123
IN
IN +
--
+
FUSE
A
C - POWER
CAUTION
RiSK OF ELECTRI C SHOCK
DO NOT OPEN
ON
ON
Local (audio)-source
e.g. SAT-receiver
WITH
switching-voltage output
Local (audio)-source
e.g. TV
WITHOUT
switching-voltage output
-
+
Aud io
OUT
Aud io
OUT
Master
Sl a v eSl a v eSl a v e
5-24V
OUT DC
5-24V
OUT DC