Technical data

M219 MK2 Re:connect
8
Detailbeschreibung
[1] LOCAL IN 1 2 3
Local Cinch inputs L/R
The M219 has 3 local line inputs for a
CD player or TV, for example, which
are located directly in the room where
the M219 is. The local audio inputs are
activated by the Local key on the (wall-
mounted) remote control. You can
scroll through a loop of the local inputs
by repeatedly pressing the Local key:
The number of active inputs that are
actually used can be set through Setup
DIL switches (4 + 5 ). This saves you
unnecessary scrolling through non-
active inputs.
If, for example, only inputs 1 and 2 are
used, you can set the switches so that
you only have to scroll through Inputs 1
& 2. Input 3 is skipped.
Special feature
With the remote button TV of the
remote control the Local input 1 can be
explicit selected in order to select a
local (TV) device.
[2] PRE OUT
Preamp outputs L/R
Using the M219s preamp outputs,
additional output devices can be
supplied, or the Revox digital speakers
can be operated through the Revox
DLC-2.
The configuration of this audio output
is described in detail on
Page 10 .
[3] SETUP
DIL Setup switches
The basic settings of the M219 are
configured through these DIL setup
switches.
Important
Configuration can only be carried out
through the setup switches when the
M219 is disconnected from the power
supply. Otherwise, the new settings
are not activated.
The function of each individual switch
is described on the next page.
(Local 1
(Local 2)
(Local 3)
1432 5678
