User Manual

Connecting the Handheld Stabilizer to MINI 3D Scanners
1. Clip the MINI into the quick-release slot on top of the Handheld Stabilizer.
2. Connect and secure the Micro-B USB cable to the scanner.
For freedom of movement, connecting the MINI via Wi-Fi is recommended when using the Handheld
Stabilizer.
Using the Handheld Stabilizer with a PC via Wi-Fi
1. Power on the Handheld Stabilizer
Long-press the ON/OFF button to power on the Handheld Stabilizer. The Bluetooth LED flashes blue
continuously when it is ready for connection.
2. Adding the Handheld Stabilizer via Bluetooth
Open your PC's Bluetooth settings and look for a device named “REVO_STABILIZER”, then click Connect to
add the Handheld Stabilizer.