User Manual

Functions Overview
① Bluetooth LED: The LED light flashes blue continuously while waiting for a connection. Once connected
successfully, the LED turns solid blue.
② Joystick: Adjusts the tilt and pan.
③ 1/4 Threaded Hole: To mount the phone holder bracket.
④ ON/OFF Switch: Long-press to power on/off the Handheld Stabilizer. Press twice to change between
Follow/Lock Mode.
⑤ Battery Level LED: Shows the remaining battery level. The LED light flashes continuously when charging
and turns solid white when fully charged.
⑥ Start/Pause Button: Press to start or pause the scan. Press twice to recenter the Handheld Stabilizer.
Charging the Handheld Stabilizer
1. Connect the USB-Type A end of the cable to an adapter, then plug it into a socket.
2. Plug the USB-Type-C end into the Handheld Stabilizer’s Type-C port.
3. The Handheld Stabilizer is fully charged when the battery LED turns solid white.