User Manual

ManualsBrandsREVOPOINT ManualsHandheld StabilizerREVOPOINT Smart S1 Handheld Stabilizer

Table Of Contents

Product Introduction
- Specifications
Functions Overview
- Charging the Handheld Stabilizer
Connecting the Handheld Stabilizer to MINI 3D Scanners
- Using the Handheld Stabilizer with a PC via Wi-Fi
- Using the Handheld Stabilizer with a Smartphone via Wi-Fi

Handheld Stabilizer

User Manual

V1.1

Summary of content (6 pages)

PAGE 1
Handheld Stabilizer User Manual V1.
PAGE 2
Content Product Introduction................................................................................................................................................................................... 3 Specifications ......................................................................................................................................................................................... 3 Functions Overview ................................................................................
PAGE 3
Product Introduction The S1 Handheld Stabilizer’s gyroscopes provide high-precision stabilization for handheld scanning, helping to avoid loss of tracking and providing a smoother scan. The motorized axes allow you to smoothly pan or tilt the scanner as you move around the object. Specifications Product Name Handheld Stabilizer Model S1 Compatible Devices MINI Power Output 5V/2A Dimension 213mm x 84.
PAGE 4
Functions Overview ① Bluetooth LED: The LED light flashes blue continuously while waiting for a connection. Once connected successfully, the LED turns solid blue. ② Joystick: Adjusts the tilt and pan. ③ 1/4 Threaded Hole: To mount the phone holder bracket. ④ ON/OFF Switch: Long-press to power on/off the Handheld Stabilizer. Press twice to change between Follow/Lock Mode. ⑤ Battery Level LED: Shows the remaining battery level.
PAGE 5
Connecting the Handheld Stabilizer to MINI 3D Scanners 1. Clip the MINI into the quick-release slot on top of the Handheld Stabilizer. 2. Connect and secure the Micro-B USB cable to the scanner. For freedom of movement, connecting the MINI via Wi-Fi is recommended when using the Handheld Stabilizer. Using the Handheld Stabilizer with a PC via Wi-Fi 1. Power on the Handheld Stabilizer Long-press the ON/OFF button to power on the Handheld Stabilizer.
PAGE 6
3. Connecting to a PC’s Wi-Fi with MINI Open the PC’s Wi-Fi settings and connect to the MINI's Wi-Fi SSID. 4. Open Revo Scan to Start your Scan 1. Adjust the scanner’s position with the Handheld Stabilizer joystick. 2. Press the Handheld Stabilizer’s Start/Pause button to begin scanning. Using the Handheld Stabilizer with a Smartphone via Wi-Fi 1. Attaching the bracket and phone holder A. Insert and screw the bracket into the Handheld Stabilizer’s 1/4 threaded hole. B.