Product Operation User Guide 3D Scanner Model: POP Version V1.0 Date OCT 26, 2020 Company Revopoint 3D Technologies Inc.
Content 1 Product overview ........................................................................................................................... 1 1.1 Product profile .................................................................................................................... 1 1.2 Packing list ........................................................................................................................... 1 1.3 Specifications ..........................................................
Product Operation User Guide 1 Product overview 1.1 Product profile The POP 3D scanner adopts proprietary 3D camera module and embedded chip to deliver accurate and fast 3D scan. This scanner is designed compact and portable, with multi-type scanning capability. It meets the requirement for product development, prototyping, 3D printing users, and artistic creation. 1.2 Packing list No. Item Qty.
Product Operation User Guide Special object scanning Outdoor scanning For the transparent and highly reflective objects, please spray powder before scanning Cover is needed to avoid interference of strong light Scanner weight ≤100g Dimensions (mm) 154.6x38.2x25.6 Printable data output Able to export 3D model directly to 3D printing Required computer configurations Windows 8\10, 64-bit Wifi 2.
Product Operation User Guide 2.2 Hardware connection 3 Software 3.1 Obtaining software Find the software installation package (Handyscan.exe) in the USB flash disk, or download it on our official website. 3.2 Software installation Double-click the Handyscan.exe. Read the agreement and choose “I accept the agreement”, and then click “Next” to finish installation.After the installation is finished, two software shortcuts will be generated as follows: scanning software ，and the post-processing . 3.
Product Operation User Guide 3.4 Software interface Double click , the following UI is shown. (1) Top navigation bar includes: Status (Preview-Scan-Finish), model type POP and About buttons; (2) Scanning distance prompt: (Scanning distance: Too near, Excellent, Good, Too Far, when the scanning distance is in the Excellent zone, the result is appropriate, when it is too close or too far, red color will be displayed.
Product Operation User Guide 4 Start scanning 4.1 Create a new project Name the project or import a model. Select alignment method: feature alignment (suitable for object with rich shape features on the surface) , marker alignment and portrait mode. Select scan mode: no colour scan (without texture) , texture scan (with color texture).
Product Operation User Guide 4.2 Open a project ★You can import a 3D file(.ply) that has been scanned before and capture a second scan. 5.3 Scan preview Adjust the camera parameters in the left preview box. Two tuning modes are supported: manual and auto. In manual mode: the brightness value and the gain value can be set manually. It is recommended to tune the brightness value in the case of accuracy is prior and the gain value in the case of speed is prior.
Product Operation User Guide please keep gain to 1 while tuning brightness to an appropriate value. To reach high scan speed, please try gain 2 or 3 while keeping brightness value as small as possible. In auto mode, please place the object to be scanned in front of the scanner. Choosing “auto” and gain value, the brightness value will be selected automatically. 4.3 Start scanning Click the "Start" button the "Stop" button to start scanning. If you want to make a pause, click the "Pause" button .
Product Operation User Guide When this prompt appears, you need to return to the previous scanned area and re-align the model to continue the scan. ② Too few points When this prompt appears, check whether the distance between the scanner and the object is too close or too far, adjust the distance to the appropriate range before scanning.
Product Operation User Guide This prompt appears when alignment error occurs in the case of scanning planes or objects with few features. To solve this problem, you can attach markers to the object surface, and select marker alignment mode before scanning. 4.4 Finish scanning Click the "Stop" button to finish the scan, and then the point cloud data will be fused by default.
Product Operation User Guide 4.5 Meshing Click the "Mesh" button to start converting the scanned point cloud into mesh.
Product Operation User Guide 4.6 Texturing The texture function only applies to the color scan mode. Click the "Texture" button then be processed..
Product Operation User Guide 4.7 Export Click the "Export" button , select the file type and a location for the files to be saved, and name the file, to export the 3D model data. The file formats of “obj, stl, ply” are supported.
Product Operation User Guide 5 Post-processing Double click to open the post-processing software：3DModelProcess ① Click the drop-down button next to "Model" button and select local model ; ② Model processing: single model and multi-model processing are supported; ③ The "Process" button at the bottom of the menu bar is for single-model processing, and the "Merge" button is for multimodel processing, you can select between the two; ④ File formats: ply/obj/stl At the bottom of the software interface, you c
Product Operation User Guide scanning. 7 Precautions (1) Please use the device indoors at the temperature of -10°~35°. The scanning effect would be better under dark light. If you need to use it outdoors, please block the sunlight and ambient light properly. (2) Do not dismantle or modify the device. (3) Please do not use the device in where there is dust or cigarette smoke. (4) Do not wet it by exposure to liquid such as fresh water, sea water, milk, soda or soap water.
Federal Communications Commission (FCC) Statement. This device complies with part 15 of the FCC Rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
