Installation guide

(Revosys X500 2DIN PC System Operations Manual) V1.2

This setting does not require restarting the MMI

1.2.2 Changing the effects of the interface

Click the button to have select the desired effect, change of the default skin effect is

DISABLED (disable the effect). You can select the other effects in the "movie

playback" interface, the center will not see the video image automatically after the

normal full screen.

1) DISABLED (disable the effect)

2) FADE IN (fade effect)

3) WIPE BOTTOM TO TOP (top-down change image effects)

4) WIPE TOP TO BOTTOM (the image changes from the bottom up effects)

5) WIPE RIGHT TO LEFT (the image changes from right to left results)

6) WIPE LEFT TO RIGHT (the image changes effective from left to right)

7) WIPE TOP AND BOOTTOM TO CENTER (images from the upper and lower

center of changes to the effect)

8) WIPE FROM SIDES TO CENTER (to the center of the image changes from the

side effects)

9) WIPE FROM ALL SIDES TO CENTER (image from the effects of four changes