I
(Revosys X500 2DIN PC System Operations Manual) V1.2 Directory Preface ...............................................................................4 Disclaimer.......................................................................................................... 5 Operation Precautions ........................................................6 A. Product maintenance precautions..................................................... 6 B. Product Caution ...............................................
(Revosys X500 2DIN PC System Operations Manual) V1.2 2.1.2 GPS Path ............................................................................... 22 2.1.3 GPS Port................................................................................ 23 2.1.4 GPS Mode ............................................................................. 23 2.1.5 GPS Synchronization time ..................................................... 24 2.2 Weather Settings...........................................................
(Revosys X500 2DIN PC System Operations Manual) V1.2 System Restore Guide ......................................................
(Revosys X500 2DIN PC System Operations Manual) V1.2 Preface Thank you for purchasing the Revosys X500 2DIN Car PC. This product is used in cars, commercial vehicles and special purpose vehicles such as the development of entirely new set of multi-vehicle intelligent vehicle information systems. This manual is authored by Revolution Systems LLC. Without official permission, readers agree not to engage in some or all of the additions and deletions, adapt, excerpt, reproduced or imitation.
(Revosys X500 2DIN PC System Operations Manual) V1.2 platform, as well as in emergency command vehicles, logistics management and security monitoring. For the proper use of the product, please read this manual. Disclaimer Watching a movie or other multimedia programs while in operation of the vehicle is prohibited by the laws of user’s country. The multimedia/video programs provide services to passengers of car, not the driver.
(Revosys X500 2DIN PC System Operations Manual) V1.2 8）Do not subject the system to physical impact. 9）Do not attempt to access the internals other than the power of this product, so as not to burn the internal components of this product. 10）The operating temperature of this product is -5 to 65 ℃, storage temperature is -40 ~ 80 ℃。 B. Product note 1) Please keep strict accordance with the instructions to operate this product.
(Revosys X500 2DIN PC System Operations Manual) V1.2 make use of the touch pen to operate the system. 5) Users can clean the touch screen surface with a soft cloth or other soft items to prevent scratching the touch screen surface. If you need to use a detergent, do not use with organic solvents, as these detergents can damage the surface film, affecting touch screen’s light transmission.
(Revosys X500 2DIN PC System Operations Manual) V1.2 press the knob, the computer boots; the computer turned on, press the knob, the computer mutes, pressing again cancels mute. If the computer is turned on, hold the knob for 4 seconds to force shutdown of the computer. 6) MINI USB interface 7) Built-in MIC interface 8) CD-ROM (OPEN) button 9) Disc Drive E.
(Revosys X500 2DIN PC System Operations Manual) V1.2 A. Press and the front panel knob for 4 seconds to force shut down of the system, which is not recommend. B. You can exit the system via the “Shut-down” selection in Windows C. Pull out car keys: shutting down the system in this manner is recommended. G.
(Revosys X500 2DIN PC System Operations Manual) V1.
(Revosys X500 2DIN PC System Operations Manual) V1.
(Revosys X500 2DIN PC System Operations Manual) V1.2 B. The software setup interface Hardware interface configurations are necessary before the software settings. 1. Set menu 1 1.
(Revosys X500 2DIN PC System Operations Manual) V1.2 Options "TRUE" "yes"; "FALSE" said "no", select the finish, click top right corner of the "Save Settings" button, your changes can be saved. The changes will take effect once the system is restarted. 1.2 Skin Settings menu 1.2.1 Select Interface Language Options For now, only "Chinese" and "English" are the only available languages, more languages will be available soon. Press the left and right arrows to select the language version.
(Revosys X500 2DIN PC System Operations Manual) V1.2 This setting does not require restarting the MMI 1.2.2 Changing the effects of the interface Click the button to have select the desired effect, change of the default skin effect is DISABLED (disable the effect). You can select the other effects in the "movie playback" interface, the center will not see the video image automatically after the normal full screen.
(Revosys X500 2DIN PC System Operations Manual) V1.2 for the center) 10) SLIDE OUT TO TOP (images slide into the top) 11) SLIDE OUT TO BOTTOM (images slide into the bottom) 12) RANDOM (random effect) 1.2.3 Select the MMI background picture Press the left and right arrows to select the background image, click the upper right corner of the "Save background" button to complete your selection. This setting does not require restarting the MMI.
(Revosys X500 2DIN PC System Operations Manual) V1.2 1.3. Music player settings 1.3.1.
(Revosys X500 2DIN PC System Operations Manual) V1.2 1.3.2. The broadcast case of table settings are displayed before the file number Select "TRUE" table in the broadcast case of the serial number of songs before the show 1,2,3,4. 1.3.3 Set the audio file format Through the use of multiple formats, separated by " ", this process can play most of the mainstream audio files. This is where you can add or delete some file formats.
(Revosys X500 2DIN PC System Operations Manual) V1.2 1.4 Radio tuner settings 1.4.1 Set the radio hardware type System default: 7) Silabs 1) Radiator 2) Cingery 3) HQCT 4) Radioshark 5) D-Link USB 6) Blaupunkt 7) Silabs 8) HD Radio Do not change, change would lead to the radio can not be used. 1.4.
(Revosys X500 2DIN PC System Operations Manual) V1.2 1.4.3 Set the serial number HD Radio Because the system default is: 7) Silabs hardware, there is no need to set this. Finally select the upper right corner of the "Save Settings" button to save the changes, the changes will take effect upon reboot of the MMI. 1.5 Video player settings 1.5.1 Select the video playback, to set the time for the automatic full screen to begin "TRUE" is for "yes", "FALSE" is for "no" 1.5.
(Revosys X500 2DIN PC System Operations Manual) V1.2 2. Settings menu 2 2.1 Custom navigation map settings You can install your own maps, and set up your map serial port. The GPS port of the MMI is COM16. If you use your own maps, the software settings for your GPS port should be COM18.
(Revosys X500 2DIN PC System Operations Manual) V1.2 2.1.1 Embedded navigation program name in the window settings Click MMI navigation software embedded in the name of the button window appears below the keyboard window to your program's Class Name and Text values of input file format is! Class Name! Text. The map requirements are to run the resolution at0 * 480 32-bit.
(Revosys X500 2DIN PC System Operations Manual) V1.2 2.1.3 Intelligent Navigation GPS port settings The MMI system's default port is COM16, do not change this. 2.1.
(Revosys X500 2DIN PC System Operations Manual) V1.2 4）3-Menu 2.1.5 Smart navigation for GPS time synchronization Finally select the upper right corner of the "Save Settings" button to save the changes, the changes will take effect after the next reboot of the MMI. 2.2 Weather Settings Automatically updated with the following options in several ways： 1）NEVER， 4）5MIN， 2）1MIN， 3）2MIN， 5）10MIN， 6）30MIN， 2.
(Revosys X500 2DIN PC System Operations Manual) V1.
(Revosys X500 2DIN PC System Operations Manual) V1.2 5) CD, DVD CD-ROM path E: \ 6) Mobile hard disk path F: \ 7) For the virtual media path, the system is not set; 8) External player MP3, iPod path, the system is not set. If you want to add songs and videos, please add the path to the above. Finally select the upper right corner of the "Save Settings" button to save the changes, the changes will take effect after the next reboot of the MMI. 2.4.
(Revosys X500 2DIN PC System Operations Manual) V1.2 2.4.2 Select file settings other LOGO Through "a" or "next" button, select the LOGO you want. Click "Save Settings" to return to the previous menu, remember to click the "Save LOGO" button. 2.
(Revosys X500 2DIN PC System Operations Manual) V1.2 after the next reboot of the MMI. 3. Settings menu 3 3.1.1 Adjust the volume settings 1 Click here to set the speed at which to control the volume: 1) First, enable the "volume control by the speed of adjustment." 2) The mute switch, the default choice "TRUE", do not change.
(Revosys X500 2DIN PC System Operations Manual) V1.2 3) The speed of the unit, "MPH (miles / hour)", "KPH (kilometers / hour)" 4) Set the minimum speed, the volume of the% (percentage), the default is 50%. 5) set the maximum speed, the volume of the% (percentage), the default is 100%. 3.1.2 Adjust the volume settings 2 Click here to set the speed to control the volume will be 1) Set the volume adjustment of the minimum starting speed. 2) Set the volume adjustment of the minimum speed of termination.
(Revosys X500 2DIN PC System Operations Manual) V1.2 Finally press the "Save Settings" button to save the changes, the changes will take effect after the next reboot of the MMI. 3.
(Revosys X500 2DIN PC System Operations Manual) V1.2 3.3 Mixer Settings The Mixer has five pre-sets: "Jazz," "Classical" "Pop," "Dance", "Percussion". For a custom setting, please adjust the sliders to your needs. 3.4 Touch screen calibration For touch screen calibration, please use a stylus pen. Do not use your nails or other sharp objects to make the calibration. Click the button on the touch screen calibration option for a 4 pointq calibration.
(Revosys X500 2DIN PC System Operations Manual) V1.2 Please paste any necessary content from the guidance of the Company, then please click the "Save". To abandon the modified content, please click the "Back" button.
(Revosys X500 2DIN PC System Operations Manual) V1.2 MMI, now restart the MMI?” Select "YES" to restart the MMI, select "NO" to return to the main interface, the changes will take effect the next time you start the MMI. C. Software setup interface C.
(Revosys X500 2DIN PC System Operations Manual) V1.2 4.1 Car Video Surveillance 1) Click on "video recording" button, video recording, recorded video is saved in D: \ CARPC \ CAMREC \ VIDEO \ directory, the longest period of time is every 30 minutes. 2) Click "Full Screen" button, for full screen image. 3) Click on the "spin image" button, the image will rotation by 90 degrees.
(Revosys X500 2DIN PC System Operations Manual) V1.2 4.2 XP Explorer interface： In Explorer, you can enter into the systems folder, and you can edit files on the system. 4.
(Revosys X500 2DIN PC System Operations Manual) V1.2 4.4 Calculator interface E.
(Revosys X500 2DIN PC System Operations Manual) V1.2 5.1 Playing music 1) The following is a row of control buttons, from left to right are: A. Loop B. Shuffle E. Play / Pause C. Stop F. next track D. Single Repeat G. Volume reduction H. Volume increase I. Mute. 2) Click "Media Library" button, and enter the album selection, as shown in 5.1.1 below. 3) Click "Play List" button to enter the currently playing album music files with list, as shown in the following 5.1.2.
(Revosys X500 2DIN PC System Operations Manual) V1.2 5.1.1 Music player / media library 1) Left arrow to return to the album list 2) Press the right arrow to enter the selected album documents 3) Pgup and Pgdn arrows, moves selection a single line up or down 4) If you want to hear the songs directly, click on the upper left corner "Add Music" button, the selected album is loaded into the player software.
(Revosys X500 2DIN PC System Operations Manual) V1.2 5.1.2 Music Player / Play patients Table You will be able to see the songs currently playing in the album 1) Click on the upper right corner of the "preview song" button, the MMI will only play the first 10 seconds of each track 5.2 Video playback interface Here is a row of control buttons, from left to right is: A. Rewind B. Fast Forward C. Stop D. Repeat single track E. Play / Pause F. Next track G. Volume reduction H. Volume increase I.
(Revosys X500 2DIN PC System Operations Manual) V1.2 D. +4：3； E. +2.35-：1 F.
(Revosys X500 2DIN PC System Operations Manual) V1.2 1) Press the left arrow, return to the videos list 2) Press the right arrow to enter the selected video files 3) Press the up and down arrows to move up a single selection 4) If you want to watch the movie directly, click on the upper left corner "Add Video" button, the selected video is loaded into the player software. 5) Pressing the "Delete Files" button will permanently delete the selected files or song files from the MMI. 5.
(Revosys X500 2DIN PC System Operations Manual) V1.2 13) Click on the button 13, play button 14) Click on the button 14, play the next track 15) Click on the pause button 15 16) Click on the button 16 into the main interface 17) Click on the button 17 into the mixer 5.4 FM radio player interface Here is a row of control buttons, from left to right is： A. Browse the radio, listen to 10 seconds for each channel B. Auto Search a signal to all stations C.
(Revosys X500 2DIN PC System Operations Manual) V1.2 G. Volume reduction H. Volume increase I. Mute 1) Click on the upper right corner of the "Rename Radio" to modify the name of the station, the name can only be in letters. 2) Click the lower right corner of the "radio delete" button to delete those stations with no signal to retain only the most useful stations.
(Revosys X500 2DIN PC System Operations Manual) V1.2 A. Back to the Top B. Virtual keyboard C. Enter URL D. Put the current web page to the Favorites folder E. Reduce page text size F. Restore website text G. Enlarge text on the page H. Page Up I. Page Down 5.
(Revosys X500 2DIN PC System Operations Manual) V1.2 Advanced Settings， Edit the following "cityweather =" content, equal sign followed by the name of the city： [Weather] cityweather=boston weatherunits=WORLD weatherdegress=? localdatacaptureinterval=30 For example, your city of Boston, please amend the text above into the red part of the "boston" Save the changes and restart the MMI to take effect.
(Revosys X500 2DIN PC System Operations Manual) V1.2 Performance parameters The following information is for the car multimedia system, the basic hardware performance, parameter description. Basic features: Product Features: Physical Dimensions (mm) Dimensions X500.
(Revosys X500 2DIN PC System Operations Manual) V1.2 Platform PM1.4G CORE 2M 1.5G Memory capacity 1024M 2048M Configuration (M) DDR400 DDRII667 of hardware Storage space performance (GB) CPU (Ghz) Display 2.5 Inch, 160G, 5400 RPM Brightness 550 nits/800*480 Resolution /6.5 Inch Diffusion Touch Screen 4-wire resistive touch screen USB Front panel USB / rear panel USB DVB-T Format European standard，Interface Module (optional) USB，External.
(Revosys X500 2DIN PC System Operations Manual) V1.2 Parameter name Test point Unit Performance Frequency range Channel low MHz 87.5 (1mVEnter) Channel end MHz 108 IF rejection 90.1MHz dB ≥50 Image Rejection 1061.1MHz dB ≥45 Stereo Separation (1KHz) 98.1MHz dB ≥15 100KHz L/R Products Troubleshooting If you think that your system may need repair, please inspect all corresponding settings, as an adjustment will fix most problems.
(Revosys X500 2DIN PC System Operations Manual) V1.2 car’s electrical The system is muted.
(Revosys X500 2DIN PC System Operations Manual) V1.2 suddenly pop up supply when the terminal voltage is on screen, "the system detects that higher than 16V, the battery voltage is the host was higher system will abnormal, the than 16V for 3 suddenly fail and it system will shut seconds, the system will not start until down" and then will think that the this is fixed the host suddenly battery voltage is too loses power.
(Revosys X500 2DIN PC System Operations Manual) V1.2 continuous 3 seconds, and instantly lower than 10.8V, or higher than 16V, the system will not operate. System Restore Guide When used over a long time, the system will gradually slow down, or you may have problems arise within the Operating system, which may require you to restore the system to the default state.
(Revosys X500 2DIN PC System Operations Manual) V1.2 The system will automatically revert to the default state. The whole process is automatic. The system restore is completed within about five minutes. Do not power off the system during this time. System Restore is only for "C" drive (system tray) System Restore, for you saved in "My Documents" in the file does not make any changes; Loading your storage/media files to the D drive is the best idea.
