User Manual
EN
9
1. Fly downwind and reduce the throttle to 25% to begin the descent.
2. Begin turning towards the runway, heading into the wind.
3. Reduce the throttle to 0% and glide onto the runway.
• If you are going to land short of the runway, add a little throttle to extend the glide.
• If you are going too fast to land, go around and try again.
Never catch a ying aircraft in
your hands. Doing so could cause personal injury
and damage to the aircraft.
2
3
3
Wind 0–5 mph
(0–8 km/h)
Pilot
1. Lower throttle to 0%
2. Disconnect and remove the ight
battery
3. Power off the transmitter
4. Fully charge the ight battery
5. After charging is complete, remove
the battery and store in a safe place
6. Inspect airframe and make any
repairs
7. Store in the original product box
When you are nished ying, never
leave the aircraft in direct sunlight or in a hot,
enclosed area such as a car. Doing so can
damage the foam.
Always disconnect the battery from the
aircraft before powering off the transmitter or
injury and damage may result.