Datasheet

Errors and omissions excepted.
KUNBUS GmbH, Heerweg 15C, 73770 Denkendorf, Germany | Tel: [phone] | Fax: [phone] |
Email: [e-mail] | Web: www.revolutionpi.com 2/2
V 1.1
RAM 2 GB LPDDR4 (Article No.: 100376, 100377), 4 GB LPDDR4 (Arti-
cle No.: 100378, 100379), 8 GB LPDDR4 (Article No.: 100380)
Flash memory 8 GB (Article No.: 100376, 100377), 32 GB (Article No.: 100378,
100379, 100380)
WLAN / Bluetooth 2.4 GHz, 5.0 GHz IEEE 802.11 b/g/n/ac wireless; Bluetooth 5.0,
BLE
Number of digital input channels 1
Digital input type 24 V DC control voltage (e.g. for power-good signal of a UPS)
Input thresholds approx. 10 V DC (0 -> 1) resp. 7 V DC (1 -> 0); input current 2.4
mA (according to IEC 61131-2)
Number of digital output channels 1
Output type opto-decoupled solid state relay, normally open, max. 30 V,
300 mA DC, any polarity
Software interface of input and output Via GPIOs and process image.
Hardware watchdog Watchdog in RTC device, freely configurable watchdog charac-
ter device
Compatible modules for system expansion All RevPi IO modules can be connected via the PiBridge system
bus.
Up to 5 modules can be connected as well to the left as to the
right side of the device.
EMC interference emission according to IEC 61000-6-4 Emission standard for industrial en-
vironments
EMC immunity according to IEC 61000-6-2 Immunity standard for industrial
environments
RTC buffer CR2032 lithium battery, lifetime approx. 10 years
Optical indicator 6 status LEDs; 5 x red/green/blue, freely programmable, 1 x
red/green
Conformity CE, UKCA
1
The bridging time required by EN 61131-2 of voltage dips of at least 10 ms and the max. USB output currect are only guaran-
teed with a supply voltage 24 V -15% / +20%.
2
The average power consumption without USB load varies greatly and depends on the use of the interfaces, the GPU and the
CPU. It is usually well below 4 watts without HDMI.
RevPi Connect 4