Manual

Gateway-component EtherCAT

18 / 30

4.6 Connecting a Gateway to the Fieldbus

To connect the gateway component to EtherCAT, you need Two

RJ45 connectors.

The pin assignment complies with the Ethernet standard.

Pin Assignment

1 TX+

2 TX-

3 RX+

4 Not assigned.

Pin 4 and 5 are interconnected and

laid via a filter on PE for better EMC

response.

6 RX-

7 Not assigned.

Pin 7 and 8 are interconnected and

laid via a filter on PE for better EMC

response.

Installation