User manual

INSTALLING PRINTER COMPONENTS
Universal Filament Spool Holders
To assemble the Filament Spool
Holders, you will need the
following items from your
Accessories Package:!
1. Spool Holder Arms (4 pieces) with M4-12mm bolts
and washers!
2. Universal Spool Holder Adaptors (4 pieces)!
3. M4-10 mm bolt!
4. 3mm Hex Key!
5. Combination 7mm wrench#
$ Facing the front of the printer, you will see how each Spool Holder Arm is numbered. !
You will notice that each of the Spool Holder Arms is labeled on each piece corresponding to
where it should go on the printer frame. Each Spool Holder Arm also has the correct bolts,
nuts and washers already included with each piece. Just unscrew them from the piece and
assemble them onto the printer frame using your 3mm hex key.!
7
1 2 3 4