User manual

UNBOXING
1. Place the shipping box upright on an even floor
surface.!
2. Open the box. !
3. Remove the first layer of cardboard. !
4. Grab the front and back of the printer frame from the
bottom of the box as shown and pull upward with
the pink side padding sliding out as well. !
5. Remove the wrapping and blue tape from the frame.!
6. Place the printer on an even and sturdy surface and
remove the side padding.!
7. Remove the zap strap holding the extruder in place.!
8. Remove the two zap straps on the x-axis.!
Whats in the box?
$ The INFINITY 3D User Guide is also available as a PDF download from our website at
www.revolution3dprinters.com/support/downloads. !
$ Accessories Package #1!
1. Spool Holder Arms (4 pieces)!
2. Universal Spool Holder Adapters (4 pieces)!
3. M4-12 bolt (1 piece)!
4. Tool Kit #
‣ 5.5 mm - 7 mm box end wrench (1 piece)!
‣ 3, 2.5, 2, and 1.5 mm hex keys (4 pieces)!
‣ Tweezers!
‣ Ceramic screw driver!
‣ Axis levelling tool!
‣ Precision oiler!
‣ Print removing blade!
‣ Quick Change nozzle !
‣ Scraper#
$!
$ Accessories Package #2!
1. Power Cord!
2. USB Cord!
3. SD Card!
$ Inside the INFINITY 3D Printer!
1. All printer components (assembled)!
2. Glass Build Plate!
5