User manual

SAFETY INFORMATION
CAUTION
!
WARNING : BURN HAZARD
HOT SURFACE - ALLOW COMPONENTS AND FILAMENT TO FULLY COOL BEFORE
HANDLING
WARNING : VAPOURS / FUMES
VAPOURS/FUMES MAY CAUSE IRRITATION AT HIGH OPERATING TEMPERATURES.
OPERATE IN A WELL VENTILATED AREA. NEVER PLACE FLAMMABLE MATERIALS
OR LIQUIDS ON OR NEAR THE PRINTER WHEN POWERED ON IN OPERATION
WARNING : MOVING PARTS CAN CRUSH/CUT
ALWAYS KEEP HANDS CLEAR WHILE OPERATING. TIE BACK LONG HAIR OR
CLOTHING THAT CAN GET CAUGHT IN THE MOVING PARTS OF THE PRINTER.
WARNING : DO NOT OPERATE UNATTENDED
DO NOT LEAVE INFINITY 3D PRINTER UNATTENDED DURING OPERATION
WARNING : ELECTRIC SHOCK HAZARD
NEVER OPEN ELECTRONICS CASE WHEN PRINTER IS POWERED ON. TURN OFF
AND UNPLUG THE POWER SUPPLY.
INFINITY 3D User Guide by Revolution 3D Printers!
Copyright © 2015 Revolution 3D Printers!
Permission is granted to copy, distribute and/or modify this document under the the terms of the Creative Commons
Attribution - Share Alike 3.0 Unported licence (CC BY-SA 3.0).!
Published by Revolution 3D Printers, Victoria, BC, Canada.!
For more information, call [phone] or visit www.revolution3Dprinters.com#
3
Do not reach inside the printer frame while it is operating and always allow for
the heated parts to be fully cooled after operation. The INFINITY 3D printer
generates high temperates and has moving parts that may cause injury.