User manual

Graphic Display Panel
You are also able print without tethering your printer to a computer by using the Graphic
Display Panel and are able to control print speed, temperature and extrusion rate while
printing. Rotate the control button to scroll through the menu and select by pressing the
control button.!
1. Turn on the printer using the power switch
located on the right hand front of the
machine. The graphic display panel will
display several logos, and then the home
status screen. Push down on the control
knob located below the display panel to
select the main menu.!
2. Rotate the control knob clockwise to
highlight Prepare and select the control
knob again to select it.!
3. Rotate the control knob to highlight
Preheat PLA or Preheat ABS depending
on the material you are using, and select it.!
!
4. Select Preheat PLA 1 or Preheat ABS 1
and click to select it. You will be returned to
the status screen to start heating your bed
and extruder. You can select materials for
your dual extruder as well by selecting
Preheat PLA 2 or Preheat ABS 2. Wait for
the actual (bottom) temperatures of the bed
and extruder to reach their desired (top)
temperatures, which should take
approximately 3 minutes. !
5. Navigate to the main menu and select Print
from SD and select the .gcode file you
would like to print. Once the axes home,
your file will start printing.!
21