User manual

Export to SD Card
You are also able print without tethering your printer to a computer by using the Graphic
Display Panel and are able to control print speed, temperature and extrusion rate while
printing just like in MatterControl.!
In the MatterControl Software, you are able to slice and export any file to a .gcode file format
which is transferred to the SD card ready to print from the printer directly. Select the file you
would like to print and select Option>Export to Folder which will generate a .gcode which
can be put on to any SD card. Another way to generate a .gcode file is to select
Options>Load Files while your printer is connected to your computer and the SD card
inserted in the printer. The program recognizes the flash storage device in the printer and can
transfer several files directly. After transferring the .gcode files to the SD card, select Eject
SD Card, disconnect your computer from the printer and you are able to start the print using
the Graphic Display Panel. !
20