User manual

Viewing and Editing your Print
$ In the Queue and Library, you are able to view your print by selecting the print file
and selecting View. In the 2D or 3D view, you are able to view your print in the build plate
and area. You are also able to Edit your print by rotating, moving, copying, scaling, mirroring,
etc. This is where you are also able to add other files to print on the print bed by selecting
Insert. MatterControl also has an Auto-Arrange option which can rearrange your prints to fit
the bed and stagger multiple parts on the same bed. If printing with a dual extruder, you can
choose parts of one print to print with each extruder by selecting Ungroup which will
recognize unique parts of a print. Manually select which part you would like to print with
which extruder. Once you’ve made your edits, select Save or Save-As to save any changes
you’ve made.!
Control while Printing
While printing, you are able to control the print speed and extrusion rate of your print using
the Tuning Adjustment in the Control settings panel. It is based on a percentage of your
printing speeds with 1 being 100% of your print speed. Eg. If you are printing at 50 mm/sec
and you increase your Speed Multiplier to 1.2, you are now printing at 60 mm/sec.
Extrusion Multiplier is used to increase or decrease the amount of material deposited per
unit of distance travelled. A lower number here will allow for integrated hinges and tight
tolerance parts to move or fit easily. !
18