REVLC08S40A-SPAX2 PowerLab 8 V2 Battery Workstation Manual

17
Configuration C
Summary: parallel charging.
Components:
 1 PowerLab 8 
 1 power source 
 1 Safe Parallel Adapter for each pack (do not use standard adapters) 
 2 or more packs (above 9 packs in parallel, you are responsible for determining
the charge/discharge current for each pack) 
 Optional FUIM3 for computer support 
PowerLab 8 mode (Normal or Expansion Channel): Normal.
PowerLab 8 maximum charge power: up to 672W charge to each of two packs
charged in parallel using 24VDC/1700W power source.
Constraints:
 1 pack per adapter. 
 Check pack polarity. 
 Same cell count for all packs. 
 Use discharge leads.
(Illustration next page)