User Manual

Polycom Installation
Plug red RCA connector of Cable C, the double RCA to double RCA cable,
into the Fusion Base Station <Conf Out>, then plug the other end red RCA
connector into the Polycom video-station <Conf In>. Plug black RCA connector
of Cable C, into the Fusion Base Station <Conf In>, and the other black RCA
connector into the Polycom video-station <Conf Out>.
Page 8
Installation Guide
S
tation
n
el LEDs
Meaning
Charging in Progress
Charging Complete
Microphone powered OFF or bat-
tery discharged
F
lashing Microphone paired and muted
N Flashing Microphone paired and “live”
R
ED Pairing mode or confirmation of
powering-down.
e
rnating slow
N and RED
Microphone or channel not
paired
N Flashing Microphone low battery
(mic live)
F
lashing Microphone low battery
(mic muted)
Searching for a connection, or
out of radio range. The Micro-
phone will try to re-establish the
link for about 15 minutes, and
then turn off automatically.
Radio congestion – it is not possi-
ble to make a radio connection
because there are already too
many nearby users, or there is
heavy radio interference. Possi-
bilities include some types of
digital cordless phones, and
other Solo installations.
Unit is faulty. Contact your AV
service provider for advice.
Page 31
Revolabs Fusion™