User Manual
Table Of Contents
- Rev 1.1
- Revolabs Fusion™ Wireless Microphone System
- Installation and User’s Guide
- Page #
- Table of Contents
- Part Numbers Covered in This Document
- Page #
- Revolabs Fusion™
- Page #
- Installation Guide
- Revolabs Fusion™
- Page #
- Installation Guide
- Page #
- Fusion Set-up
- Page #
- Revolabs Fusion™
- Safety and General Information
- Page #
- Installation Guide
- Revolabs Fusion™
- Audio Conferencing
- Video Conferencing
- Page #
- Installation Guide
- Lifesize Installation
- Specifications
- Page #
- Revolabs Fusion™
- Warranty
- Page #
- Installation Guide
- Revolabs Fusion™
- Page #
- Polycom Installation
- Page #
- Installation Guide
- Page #
- Revolabs Fusion™
- Revolabs Solo™ Indicator LED
- Page #
- Installation Guide
- Page #
- Revolabs Fusion™
- Page #
- Installation Guide
- Page #
- Revolabs Fusion™
- Using the Solo XLR Microphone Wireless Adapter
- Page #
- Installation Guide
- Page #
- Revolabs Fusion™
- Tandberg Installation
- Page #
- Installation Guide
- Page #
- Revolabs Fusion™
- Using Solo Tabletop Wireless Boundary Microphones
- Page #
- Installation Guide
- Page #
- Revolabs Fusion™
- Pairing Wireless Microphones to Fusion Base Station
- Page #
- Installation Guide
- Page #
- Revolabs Fusion™
- Using Revolabs Microphones and Microphone Adapters
- Using Revolabs Solo™ Wearable Wireless Microphone
- Page #
- Installation Guide
- Page #
- Revolabs Fusion™
- Details about the Revolabs Fusion
- Fusion Front Panel
- Page #
- Installation Guide
- Page #
- Using the Revolabs Fusion™ Charger Base
- Charging the Microphone Batteries
- Revolabs Fusion™
- Using the Revolabs Fusion™ IR Remote Control
- Page #
- Installation Guide
- Page #
- Fusion Back Panel
- Revolabs Fusion™
- Programming Port: DIP Switches
- Page #
- Installation Guide
- Programming Ports DIP Switches Used for Phone Answering
- Setting Phone Answering Mode
- Page #
- Revolabs Fusion™
- Programming Ports DIP Switch Used for Muting Option
- Setting the Mute Option
- Page #
- Installation Guide
- Programming Port Settings for Multiple Fusion Systems
- Setting the Transmit Power Level for Multiple Fusion Systems
- Frequency Settings
- Page #
- Revolabs Fusion™
Installation Guide
Lifesize Installation
Plug red RCA connector of Cable C, the double RCA to double RCA cable,
into the Fusion Base Station <Conf Out>, then plug the other end red RCA
connector into the Lifesize video-station <Conf In>. Plug black RCA connector
of Cable C, into the Fusion Base Station <Conf In>, and the other black RCA
connector into the Lifesize video-station <Conf Out>.
Specifications
Dimensions, (L, W, H) and Weight:
Fusion Base Station 16.45” (41.8 cm) x 8.46” (21.5 cm) x 1.7” (8.7 cm), 8.7 lbs (3.95 kg)
Charger Base 8.3” (21.1 cm) x 4.3” (10.9 cm) x 1.0” (2.56 cm), 1.0 lb (0.45 kg)
Wireless Microphones Wearable: 0.9” (2.3 cm) x 0.8” (2.0 cm) x 2.6” (6.6 cm), 0.05 lb (0.02 kg)
TableTop: 1.5” (3.8 cm) x 0.8” (2.0 cm) x 3.3” (8.4 cm), 0.05 lb (0.02 kg)
XLR Adapter: 0.9” (2.3 cm) x 0.8” (2.0 cm) x 4.0” (10.2 cm), 0.05 lb (0.02 kg)
Radio Frequency:
01-8FUSION-XX 1.92 to 1.93 GHz (UPCS North America)
01-4FUSION-XX 1.92 to 1.93 GHz (UPCS North America)
01-8FUSIONEU-XX 1.88 to 1.90 GHz (DECT EU)
01-4FUSIONEU-XX 1.88 to 1.90 GHz (DECT EU)
Connectors:
Fusion Base Station
IR Remote Serial DB9
CD Programming Serial DB9 - for Revolabs use only
Audio Control RJ45 – for Revolabs use only
Telephone Line-In RJ11
Telephone Set-In RJ11
Network RJ45 – for Revolabs use only
XLR male
Aux In RCA Plug
Aux Out RCA Plug
Record Out RCA Plug
Room Out RCA Plug
Conference In RCA Plug
Conference Out RCA Plug
Charger Base DC power input port, Proprietary 4 pin microphone charge jacks
Microphone Proprietary 4 pin charge plugs, 2.5mm mono earplug port
Power Requirements:
Fusion Base Station 100-240V AC, 50-60 Hz, 10W (power cable varies by country)
Charger Base 5V DC, 2 Amps (switching power supply varies by country)
Range: 100’ (30 meters) approx. (no obstructions)
Maximum Microphones:
01-8FUSION-XX, 01-8FUSIONEU-XX 8 channels maximum
01-4FUSION-XX, 01-4FUSIONEU-XX 4 channels maximum
Battery: Lithium Polymer, 8 hours approx. talk time
Charge Time: 2 hours approx.
Audio Bandwidth 100-7000 Hz
Security: 128-bit DSAA (DECT Standard Authentication Algorithm) authentication,
64 bit DECT Standard Cipher
Page 33
Revolabs Fusion™