User manual

Enjoy!
Step4: Operate the APP
With above all finished, you can just control the smart Strip directly on the terminal without a home
network. However, if you would like to link the home network, the following is for your reference:
Open the smart terminal to Wi-Fi Settings and find the device, of which default name is
“SmartStripXXXX”, just link it.
Add to network
1.Operate the Revogi APP downloaded ,click "Yes" on popup notice"New Device detected,join it
to Wi-Fi?"
2.Choose your router name ,enter the password.
3.It indicates the successful link to Wi-Fi if the Wi-Fi LED flashes about 3 times per second to
complete brightness.