RM185-ID1 LCD Monitor TFT LCD MONITOR User's Manual
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
● Table of Contents 1. Important safety instruction ------------------------------------------------- 2 2. Product feature ------------------------------------------------------------------- 3 3. Product installation ------------------------------------------------------------- 4 - 5 4. Function Keys -------------------------------------------------------------------- 6 5. MENU function ------------------------------------------------------------------- 7 - 8 6.
● Important safety instruction Do not scratch the screen of the LCD monitor with sharp materials such as nails and pens. The interior part of the monitor is composed of electric elements. If the monitor is broken, do not try to disassemble it, because it is necessary to contact appropriate technical services in order to have the product repaired. Take care not to use damaged cords and keep this product out of reach of children and persons who are not involved in using the product.
● Product feature ▶ Introduction This monitor is a high-resolution monitor has features of electromagnetic wave blocking, reduction in electricity consumption and efficient use of space. It is recommendable to read this manual before using this product. ▶ Product features 1. This monitor (RM185-ID1) has an 18.5-inch flat surface (color active Matrix TFT LCD) with pixel size of 0.3mm (H) X 0.3mm (V) for an ultra-precision, high resolution image. 2. The RM185-ID1 uses an 18.
● Product installation ▶ Components LCD Monitor User’S Guide Power Cord Adaptor VGA Cable Audio Cable Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Notice Please use the cables that are provided. REVO does not take responsibility for any problems that arise from using any other cables.
▶ Installation 1. Please turn off the RM185-ID1 before connecting any device to it. 2. Connect adaptor cable to DC power-on on the rear side of the RM185-ID1 then connect power cord to adaptor. 3. RM185-ID1 has 15pin VGA port. Connect the cables properly to your DVR between VGA. 4 .Turn on your DVR and RM185-ID1. 5. Display conditions with can be adjusted by pushing control buttons on the right side of the RM185-ID1. 6.
● Function Keys ▶ Operation of the function keys Button AUTO MENU Function Hot Key Automatically adjusts the picture. Opens the Main Menu. ▲ Up / Right VOLUME up ▼ Down / Left VOLUME down POWER ON / OFF ▶ On Screen Display (OSD) Menu Navigation 1. Press the MENU button, the main OSD menu will be appear on the screen. 2. Press the ▲/▼ buttons to navigate through the menu then press the MENU button to make the selection.. 3. To navigate out of a menu, press the AUTO button.
● MENU Function ▶ Color ☞ Contrast Brightness Color Adjust Color Temp 50 - + Contrast: Adjusts contrast level at the picture. Brightness: Adjusts brightness level at the picture. Level of color force: Adjusts to color saturation of the picture.(Red,Green,Blue) Red: Adjusts share of red. Green: Adjusts share of green. Blue: Adjusts share of blue. Color Temp: Adjusts color Temp ▶ Image Setting ☞ Clock Phase Sharpness H. position V. position - 50 + Clock: Adjusts pixel's horizontal size.
▶ OSD Menu ☞ OSD H.Pos OSD V.Pos OSD Timer Language 50 - + OSD OSD Horizontal Horizontal Adjustment: Adjustment: Adjusts Adjusts OSD OSD menu menu screen's screen's horizontal horizontal location. location.(0-100) OSD OSD Vertical Vertical Adjustment: Adjustment: Adjusts Adjusts OSD OSD menu menu screen's screen's vertical vertical location. location.
● Timing Guide ▶ Timing guide This product is a multi-frequency monitor. It functions in horizontal frequencies from 30kHz to 80kHz and vertical frequencies from 56Hz to 75Hz. Due to tis design based on microprocessor, It offers the functions of automatic synchronization and automatic size. Resolution Frequancy ITEM VESA Horizontal Vertical Horizontal Vertical 1 640 480 37.9kHz 60Hz 2 640 480 37.9kHz 72Hz 3 640 480 37.5kHz 75Hz 4 800 600 35.1kHz 56Hz 5 800 600 37.
● Input signal detail ▶ Cable Connections No. Input / Output Cable Type 1 DC Power DC Power Cord 2 Audio IN Audio Cable 3 VGA IN 15-pin VGA Signal Cable ▶ Plug & Play The adoption of the new VESA Plug and Play solution eliminates complicated and time consuming setup. It allows you to install your monitor in a Plug and Play compatible system without the usual hassles and confusion. Your PC system can easily identify and configure itself for use with your display.
● Product specifications Type LCD Pixel Pitch Display Color 18.5" diagonal viewable screen TFT (Thin Film Transistor) Active matrix panel R, G, B vertical stripe 16,777,216 colors Viewing Angle H/V 170˚ / 160˚ Contrast ratio T y p. 1000 : 1 Brightness T y p. 250 cd/㎡ Response Time T y p. 5 ms Refresh rate M A X. 1366 x 768 @ 59Hz for optimal display Input signal 15-Pin VGA, Audio-in Connectors Power Voltage / Input Power Output Consumption Screen size M A X.
● Troubleshooting ▶ No power - Flip the power switch ON. The Power LED turns on. - Make sure AC /DC power cord is securely connected to the power jack and to a power outlet. ▶ Power on but no screen image - Make sure the VGA cable attached with this monitor is tightly secured to the VGA output port on the back of the device. - Adjust the brightness and contrast. ▶ Image is unstable, unfocused - Use AUTO-TUNE to adjust automatically.
▶ Entire screen image rolls (scrolls) vertically. - Make sure the input signals are within the LCD monitor's specified frequency range. (Maximum : 1366 * 768 @59Hz) - Connect the VGA cable securely. - Try the monitor with another power source. ▶ Control buttons do not work - Press only one button at a time. ▶ When the message of 'out of range' appears - Restart the computer and while it is restarting, press F8 until the Startup menu appears. Then enter to start the computer in 'safe mode'.
