Instruction manual

Chapter 1 — Introduction

1.1 Features

The REVO TRAX dome camera and the keyboard controller make up the building blocks for

any surveillance/security system. Using multiple Keyboard Controllers and multiple dome

cameras, no place is too large for monitoring. Extensible and flexible architecture facilitates

remote control functions for a variety of external switching devices such as multiplexers and

DVRs.

• Built-in optical power zoom camera with True Night Shot function.

• 240 Preset positions.

• 8 Tours consist of Preset, Pattern, Auto-Scan and other Tours can be programmed with

over 300 functions and Preset location. While moving, each Preset scan can be watched in

smooth Vector Scan mode.

• 16 Auto Scans with the normal, the vector, and the random mode and the Endless Auto-

Pan with 13 speed steps.

• 8 Patterns (up to 500second) and 8 Privacy zones.

• 16 Area Titles.

• 8 Alarm inputs / 4 Aux outs (NC & NO).

• Variable speed from 0.1°/sec to 380°/sec.

Three Variable speed (SLOW, NORMAL, TURBO)

Turbo speed is Max 380°/sec with Ctrl key pressed.

• Pan / Tilt speed is inversely proportional to the zoom ratio with the option.

• Maximum speed is 380°/sec when preset command.

• Auto Calibration from 0.1° to 6° (Tilt range is 0° to 180°).

• Programmable user preferences (alarm, preset, title, etc.).

• 180° Digital Flip or 90° Auto Flip depended on the model.

• Up to 999 selectable camera addresses (3999 by software setting).

• Multi-language Menu Display, Password Confirmation.

• Function Run menu using DVR without function key (Pattern, SCAN,..)

• Built-in RS-485/422 receiver driver.

• Optional Clear bubble with black liner (shelter) for concealing the camera.

• Optional Tinted Bubble, Indoor & Outdoor pendant housing with heater & blower, Indoor

Flush mount, Parapet mount & Roof Top mount.