Instruction manual

darken the scene. This is helpful when the scene is too bright or
too dark.
IRIS PEAK Set the effect of focusing peak, or how video peaks affect the overall
picture brightness. (000-127, default :016)
When the scene have bright lights such as spotlight or headlight, if
you set Iris peak level high, the image get dark because of the effect
of focusing peaks. Overall picture darkens.
If you set Iris peak level low, the image has no effect of focusing
peak and the image of spot lights get white. Overall picture remains
but spot light become very bright.
When you set Iris offset level low in an image with spotlights, a soft
image may occurs because of the image of on and around the
spotlights get saturated.
BACK LIGHT Objects in front of bright backgrounds will be clearer with BLC ON.
Note: When ON, WDR will be disabled.
BACK LIGHT LEVEL 0 ~ 255
NIGHT SHOT AUTO,ON,OFF,GLOBAL
WDR ON, WDR1, WDR2
NOTE: Values in ( ) are for PAL Camera.
The NIGHT SHOT option removes the IR cutoff filter of the camera and makes the camera
sensitive to near infrared.
AUTO Camera goes in to B&W mode at low light.
GLOBAL Controlled by the keyboard.
The operator can enable NIGHT SHOT for all dome cameras at the same time.
If the NIGHT SHOT mode is set to GLOBAL, “999” +
ENTR will turn Off the NIGHT SHOT
mode and “888” + ENTR will turn On the NIGHT SHOT mode.
ON : B/W mode.
OFF: Color mode.
NOTE : The Night Shot function is controllable only AE, AE(DSS), and Priority
(Shutter/Iris/AGC) mode.
AE mode DSS IR Remove WDR
AE X
O [Manual] O
AE (DSS)
O [auto] O [Manual] O
AE(DAWN)
O [auto] O [auto] : Hi sensitivity O
AE (DARK)
O [auto] O [auto] : Mid sensitivity O
Shutter priority
O [Manual] O [Manual] X
IRIS priority
X O [Manual] X
AGC priority
X O [Manual] X
X : not available, O: available
• LINE LOCK CONTROL
31