Instruction manual

CAMERA SETUP
FOCUS CONTROL
WB CONTROL
AE CONTROL
LINE LOCK CONTROL
SHARPNESS : AUTO
DIGITAL ZOOM : OFF
IMAGE FLIP : OFF
PRESET FREEZE : OFF
AGC LIMIT : 25
IMAGE STABLIZATION: OFF
SAVE AND EXIT(ESC TO CANCEL)
SHARPNESS
The higher the value, the more edges in the picture will be
enhanced (AUTO/0~31)
Digital ZOOM OFF : Zoom range is limited to the optical.
2x : Zoom is extendable up to 2x of digital range.
4x : Zoom is extendable up to 4x of digital range.
MAX: Zoom is extendable Max digital zoom range.
IMAGE FLIP This function turns the video output from the camera upside
down and reverses it horizontally.
This option is helpful to install in the opposite side.
PRESET FREEZE ON: the image is frozen during calling preset.
AGC LIMIT Set the maximum AGC gain tuning value (00-40, default : 25).
IMAGE STABILIZATION ON: To increase the stability of an image from frame-to-frame
jitter with shaking.
Note: When the image stabilization function is operating, DSS will be disabled and
WDR will be turned OFF.
• FOCUS CONTROL
FOCUS SETUP
MODE : AUTO
FOCUS LIMIT : 30CM
SAVE AND EXIT(ESC TO CANCEL)
MODE AUTO / MANUAL / ONE PUSH / CONSTANT MANUAL
Use manual mode in normal use.
FOCUS LIMIT Set the minimum focus length under 10x zoom ratio.
(1CM / 10CM / 30CM / 1M / 1.5M: This distance is approximate
value.)
CAUTION: Avoid continuous, 24-hour use of the auto focus. This will shorten the
lifespan of the lens.
• WB (White Balance) CONTROL
29