Instruction manual

WDR LEVEL 10~50
NIGHT SHOT AUTO / ON / OFF / GLOBAL
NOTE: Values in ( ) are for PAL Camera.
NOTE: The WDR operates in AUTO1 mode only.
The NIGHT SHOT option removes the IR cutoff filter of the camera and makes the camera
sensitive to near infrared.
AUTO Camera goes in to B&W mode at low light.
GLOBAL Controlled by the keyboard.
The operator can enable NIGHT SHOT for all dome cameras at the same time.
If the NIGHT SHOT mode is set to GLOBAL, “999” +
ENTR will turn Off the NIGHT
SHOT mode and “888” + ENTR will turn On the NIGHT SHOT mode.
ON B/W mode.
OFF Color mode.
• DNR CONTROL
DNR CONTROL SETUP
2DNR(1) : 001
3DNR(1) : 010
2DNR(2) : 005
3DNR(2) : 002
SAVE AND EXIT(ESC TO CANCEL)
2DNR(1), 2DNR(2) Select 2D noise reduction level (OFF / 001~007)
3DNR(1), 3DNR(2) Select 3D noise reduction level (OFF / 001~031)
NOTE: DNR(1) applied when motor stopped. DNR(2) applied when motor moving.
• LINE LOCK CONTROL
LINE LOCK SETUP
MODE : INTERNAL
PHASE : 000
SAVE AND EXIT(ESC TO CANCEL)
MODE INTERNAL / EXTERNAL
PHASE Adjusts phase of picture with other cameras in EXTERNAL mode.
(0~259 NTSC, 0~319 PAL).
3.14 Camera Menu Type 3
28