600TV Lines Super High Resolution Color Camera 3-AXIS PLASTIC DOME CAMERA Please read this manual thoroughly before use, and keep it handy for future reference. Design and specifications are subject to change without notice.
WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR OTHER OPENINGS ON THE EQUIPMENT. CAUTION CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
FCC COMPLIANCE STATEMENT FCC INFORMATION : THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT.
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4 . Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
INTRODUCTION The camera provides high-quality images using Sony CCD technology especially designed for closed-circuit television (CCTV) and security surveillance applications. Features: High resolution and high performance Sony Super HAD TM Technology Excellent picture quality 600 lines(Color) of resolution 0.1 lux(Color), 0.04lux(B/W) @ F1.
CAMERA CONNECTIONS 3 1 2 1. Lens : A/I Vari-focal lens for wide area monitoring. (D&N with ICR model option) 2. Power : 24V AC input / 12V DC input power source from a DC 12V or AC 24V ac +/-10% 60/50Hz +/-1Hz Use Certified/Listed Class 2 power source only. *If using DC 12V power adaptor, use a power supply capable of supplying 5 Watts. 3. Video : BNC connector used to connect the camera to a monitor, switcher, etc. REMINDER: Never aim the camera directly into the sun.
CONTENTS of PACKAGE The package contains the following. Camera in Housing Instruction Manual (This Document) Accessory Kit for Installing Drilling guide label 1 1 1 1 BASE INSTALLATION 1. Make mounting holes and cable hole in the place (ceiling or wall) to which this dome camera is installed using the Drilling guide label.
2. To remove dome cover, turn the dome body counterclockwise until locators reach end of travel and pull off. Push the liner on the sides where the patterns are put in the teeth of a comb and pull it out. CEILING / WALL Drilling Guide Label A5 n(P ) itio g illin Dr s Po Plastic anchor Screw Tapping (M6) 3. Attach the housing to the ceiling using suitable fasteners, M6x35 tapping screws are supplied only use if they are suitable.
- Video out checkTest Monitor D O WN R1 R2 R3 RIG HT SP OT VID EO 2 CN R4 UP Joystick Switch Board 7
STRUCTURE OF THE SETUP MENU LENS EXPOSURE WHITE BAL BACKLIGHT DAY NIGHT DPC SPECIAL IMAGE ADJ RESET EXIT DC MANUAL SHUTTER BRIGHTNESS AGC DWDR RETURN ATW1 ATW2 AWC -> SET MANUAL OFF BLC HLC AUTO COLOR B/W EXT COVER THE LENS THEN PRESS ENTER KEY CAM TITLE MOTION PRIVACY PARK.LINE LANGUAGE RETURN LENS SHAD. 2 DNR MIRROR FONT COLOR CONTRAST SHARPNESS DISPLAY NEG.
LENS (Selection) This function is used to adjust the brightness of the screen. 1. When the SETUP menu is displayed on the screen, please position the arrow to point to 'LENS' by using the UP and DOWN buttons. 2. Please select the type of the lens you wish to use by pressing the LEFT or RIGHT button.
WHITE BAL The screen color can be adjusted by using the WHITE BALANCE function. Set the color temperature 2500oK 10000oK o o Set the color temperature 2000 K 13000 K Please press the ENTER button while the camera is directed at a piece of white paper to obtain the optimum state under current illumination. if the environment including the light source is changed, you have to adjust the white balance again. 1) ATW1 2) ATW2 3) AWC -> SET 4) MANUAL Manual mode. User can change R and B Gain manually.
DAY NIGHT The DAY/NIGHT menu is used to configure the day and night related setting for this camera. This camera can turn the IR(infrared)filter on or off.
SPECIAL 1) CAM TITLE A B C A. CAM TITLE B. Character Table C. Command Line CAM TITLE . ←→ CLR POS END 2) MOTION AREA SELECT AREA STATE HEIGHT WIDTH LEFT/RIGHT TOP/BOTTOM DEGREE VIEW LENS EXPOSURE WHITE BAL BACKLIGHT DAY NIGHT DPC ► SPECIAL IMAGE ADJ RESET EXIT ← : Move to left → : Move to right CLR : Erase all characters POS : Move the position of title END : Save and End Select MD area number.
3) PRIVACY AREA SELECT AREA STATE HEIGHT WIDTH LEFT/RIGHT TOP/BOTTOM COLOR RETURN Select MASK area number.(Area 1 ~ Area 8) Select MASK ON/OFF Adjust height of MASK area Adjust width of MASK area Adjust the location of the MASK area with boundary LEFT and RIGHT Adjust the location of the MASK area with boundary TOP and BOTTOM. Select MASK color. (0~15) LENS EXPOSURE WHITE BAL BACKLIGHT DAY NIGHT DPC ► SPECIAL IMAGE ADJ RESET EXIT 4) PARK.LINE SPECIAL CAM TITLE MOTION ► PRIVACY PARK.
IMAGE ADJUST 1) LENS SHAD 2) 2DNR 3) MIRROR 4) FONT COLOR 5) CONTRAST 6) SHARPNESS 7) DISPLAY 8) NEG. IMAGE Adjust Lens shading level (0~255) Select 2DNR ON/OFF Select MIRROR ON/OFF Select FONT COLOR level (0~15) Select IDR TITLE level (0~15) Adjust CONTRAST level (0~255) Adjust SHARPNESS level (0~31) Select DISPLAY mode (CRT /LCD/USER) Select Negative image mode ON /OFF IMAGE ADJUST ► LENS SHAD 2DNR MIRROR FONT COLOR CONTRAST SHARPNESS DISPLAY NEG.
IMAGE ADJUST LENS SHAD 2DNR MIRROR FONT COLOR CONTRAST SHARPNESS ► DISPLAY NEG.IMAGE RETURN CRT ADJUST ► PED LEVEL COLOR GAIN RETURN ON ON OFF IIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIII 022 192 RET 122 21 CRT OFF RET LCD AJUST ► GAMMA PED LEVEL COLOR GAIN RETURN USER AJUST ► GAMMA PED LEVEL COLOR GAIN RETURN 0.50 IIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIII 028 160 RET 0.
LENS ADJUSTMENT (OPTIONAL VARIFOCAL LENS) T Focus: Adjust lens focus from near (N) to infinity ( ). W N Field of view: Adjust setting from Tele (T) to Wide (W) field of View. Adjust Focus Adjust Angular Field View DC AUTO IRIS LENS Image Size 2.8-12mm 9-22mm 4-9mm 1/3" CCD 1/3" CCD 1/3" CCD 2.8-12mm Focal Length 5% Aperture Ratio 1 : 1.2 Angular DIAGONAL 2.8mm : 119.9o 12mm : 28.80o Field of View 9-22mm 5% 1 : 1.4 4-9mm 5% 5% 1 : 1.
SPECIFICATIONS MODEL Power PAL NTSC AC24V ± 10% / DC12V ± 10% Power source 200mA (2.5 Watts) Power consumption 1/3" Sony Super HAD CCD II Image sensor Total pixels 811(H) x 507(V) Scanning system Scanning frequency General F U N C T I O N Connector & etc. Min.
EXTERNAL DIMENSION Dimensions 113 145.6 100 (Inner) 59 Unit: mm Window Size 0.1 in. (2.5mm thick), impact-resistant P.C (LEXAN) 3.93 in. (10cm) diameter Cable Entry One 1" opening holes Weight - Unit: Shipping: 0.88 lb. (0.4kg) 1.41 lb. (0.
