Indoor / Outdoor IR Night Vision Camera Instruction Manual VER.:1.0, NO.
Thank you for purchasing our product. Before installing this camera, please read this instruction manual carefully to ensure proper use. 1. Safety Precautious CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN! CAUTION : TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT OPEN COVERS. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems).
. Feature Built-in high quality CCD camera and high performance infrared illuminator module. Total pixels of sensor: NTSC=380K / PAL=440K pixels. High sensitivity, low smear, excellent anti-blooming, and high S/N ratio. Supports functions: Auto Electronic Shutter (AES), Auto Gain Control (AGC), Auto White Balance (AWB), Back Light Compensation (BLC), and Flickless mode (FL). Special functions: Mirror (Option), Positive/Negative (Option). Built-in board Lens and furnished with mounting bracket.
5. Installation & Operation 1. Install Preparation Drill hole in wall if wire needs to go through the wall. 2. Install Camera Use the 3 screws provided to attach the camera and bracket to the ceiling, surface or wall.
3. Adjust 3-Axis Bracket Adjust the bracket while checking the view angle from the monitor. Loosen the bracket lock knob by turning counterclockwise, after adjusting the 3-Axis bracket (X-Y-Z Axis) to get the desired viewing angle, tighten the lock knob by turning it clockwise. 4.
. SPECIFICATIONS According to the camera purchased, select and refer to the appropriate specification below: RCBY24-1 Model No. RCBY12-1 Image Device 1/3” Color CCD (Sharp Chipset) Picture Elements NTSC: 768x494 PAL: 752x582 Resolution 540 TVL 0.02Lux/ F1.2 (Day) 0Lux (IR On) Min Illumination S/N Ratio More than 48dB NTSC: 1/60S~1/100,000S PAL: 1/50S~1/100,000S Electronic Shutter Gain Control Auto White Balance Auto Gamma 0.
