User Manual

Taking pictures
Once your smartphone has been
paired via Bluetooth or plugged into
the Selfie Stick, you’re ready to start
taking pictures.
1. Open the camera app on your phone.
2. Press the shutter button on the handle
of the Selfie Stick to take a picture.
Charging the battery
(AC-SSB200 only)
A USB cable is included to recharge
the battery in your Selfie Stick.
1. Plug the Micro USB connector into
the Micro USB port on the base of
the handle.
2. Plug the USB Standard-A
connector into a powered USB port
on a computer or USB charger. The
LED indicator next to the Micro USB
port will glow while the battery is
recharging.
3. The LED will turn off when the
battery is fully charged.
Note: The battery will operate for approximately
20 hours when fully charged. If you plan to use
your Selfie Stick for an extended period of time,
fully charge the battery before use.
Adjusting the Selfie Stick
1. Loosen the locking knob, adjust the
phone to the desired angle, and
tighten the knob.
2. Hold the handle firmly and pull the
camera and clip to extend the stick
to the desired length.