Installation Guide

7.) Bend the holding tabs you selected outward.

9.) Disconnect FAN motor from electrical enclosure. Remove the electrical cover

set screw and slide open the electrical enclosure.

remove set

screw

unplug fan

connector

slide

10.) Connect wiring using the provided QUICK CONNECTS (U.S.A.) or WIRE

NUTS (Canada).

WIRE NUT

Qty:3

(Canada only)

2-WIRE QUICK

CONNECT

Qty:2

(U.S.A. only)

3-WIRE QUICK

CONNECT

Qty:1

(U.S.A. only)

WARNING: Disconnect the AC power before any work is done to any part of

the circuit ReVent

is connected to. If you do not understand this warning,

seek the services of a qualified licensed electrician.

WARNING: Copper to copper only. Do not use aluminum wire.

WARNING: Follow all local electrical and safety codes, and NEC (National

Electrical Codes).

CAUTION: If your house wires do not match these colors, determine what

each house wire represents before connecting. You may need to consult a

qualified licensed electrician to determine this safely.

8.) Set FAN into place in the opening using holding tabs, now the tabs hold the fan

in position in the ceiling opening.

holding tab