User manual

3. Connect the live and neutral to the outer
terminals Do this by inserting the wire ends
into the terminal. Press down the release lock
of the terminal to release the individual wires.
4. Connect the green-yellow protective earth
(PE) conductor to the middle terminal,
marked with y.
5. Install the socket onto the installed flush-
mounting socket in the wall.
6. Put the frame on.
7. Put the cover on the socket and screw it on.
When you put it on, ensure that the cover is
put onto the USB port first.
8. Turn the power back on again.
9. Check that it functions properly, using a two-
pole voltage tester.