Installation Guide

ManualsBrandsRev-A-Shelf ManualsPull Out Trash Cans24-Quart Plastic Pull Out Trash Can

INSTALLATION INSTRUCTIONS: RV-SERIES WASTE CONTAINERS AND HAMPERS

12400 Earl Jones Way

Louisville, KY 40299

rev-a-shelf.com

Customer Service: 800-626-1126

RV-SERIES WASTE CONTAINERS AND HAMPERS

I-RV-CK-HURV-0519

TOOLS REQUIRED:

15 MIN

ESTIMATED ASSEMBLY TIME:

CARE AND MAINTENANCE:

Clean with a damp cloth and wipe

parts dry.

* Depending on unit purchased

Door Mounting Kit Sold Separately

Part# RV DM KIT

HURV-1512 RV-9PB RV-18PB-2

RV-18PB-1 RV-1216-CK HPRV-1520

PARTS LIST

No. Description Qty.

A Base Unit 1

B Waste Containers/Hamper 1 or 2*

C #8 x 3/4” Truss Head Screws 4

B C

WATCH VIDEO TUTORIALS OF

PRODUCT INSTALLATIONS

WWW.REV-A-SHELF.COM/VIDEOS

Summary of content (4 pages)

PAGE 1
2400 Earl Jones Way Louisville, KY 40299 rev-a-shelf.com Customer Service: 800-626-1126 RV-SERIES WASTE CONTAINERS AND HAMPERS TOOLS REQUIRED: #2 HURV-1512 RV-9PB RV-18PB-2 RV-18PB-1 RV-1216-CK HPRV-1520 ESTIMATED ASSEMBLY TIME: 15 MIN PARTS LIST CARE AND MAINTENANCE: Clean with a damp cloth and wipe parts dry. No. Description Qty.
PAGE 2
STEP 1 Note: Your RV series has been shipped fully assembled for ease of installation. FIG. A First remove the container(s) from the wire frame. Place the frame inside of your cabinet. Look to make sure that there is plenty of clearance to shut the door and for the waste containers (See Figure A). STEP 2 FIG. B With the frame in a closed position, insert the front two screws, making sure that the framework is square to the front of the cabinet (See Figure B).
PAGE 3
12400 Earl Jones Way Louisville, KY 40299 rev-a-shelf.com Customer Service: 800-626-1126 INSTRUCCIONES DE INSTALACIÓN / INSTRUCTIONS D’INSTALLATION CONTENEDORES Y CESTAS DE BASURA RV-SERIES RV-GAMME DE CONTENANTS À DÉCHETS ET PANIERS Herramientas requeridas: Outils Requis: #2 HURV-1512 RV-9PB RV-18PB-2 RV-18PB-1 RV-1216-CK HPRV-1520 Tiempo estimado de ensamblado: Durée de l’installation: 15 MIN CUIDADO/ ENTRETIEN: Limpie con un paño húmedo y seque las partes.
PAGE 4
PASO 1 / ÉTAPE 1 Nota: Su RV-Series ha sido enviada completamente ensamblada para facilitar su instalación. FIG. A Primero quite los contenedores del bastidor de metal. Coloque el marco dentro de su gabinete. Asegúrese de que haya suficiente espacio para cerrar la puerta y para los contenedores de desechos (Ver figura A). Note : Votre gamme RV a été expédiée complètement assemblée pour permettre une installation facile. D’abord, enlever le(s) contenants du cadre métallique.