Template

12400 Earl Jones Way

Louisville, KY 40299

rev-a-shelf.com

Customer Service: 800-626-1126

7.5”

(190.5 mm)

Cut here for face frame cabinet

Hole locations

Instructions:

1. Cut bottom of template to the correct cabinet type.

2. Place template in cabinet.

A. For frameless, align to front of cabinet.

B. For face frame, align to back edge of face frame.

3. Mark hole locations with an awl.

4. Remove template.

5. Repeat steps 2-4 for top of cabinet.

Cut here for frameless cabinet

T-NSLS-0818

NOT-SO-LAZY SUSAN TEMPLATE

PAGE 1
NOT-SO-LAZY SUSAN TEMPLATE 12400 Earl Jones Way Louisville, KY 40299 rev-a-shelf.com Customer Service: 800-626-1126 Hole locations 7.5” (190.5 mm) Instructions: 1. Cut bottom of template to the correct cabinet type. 2. Place template in cabinet. A. For frameless, align to front of cabinet. B. For face frame, align to back edge of face frame. 3. Mark hole locations with an awl. 4. Remove template. 5. Repeat steps 2-4 for top of cabinet.
PAGE 2
PLANTILLA / GABARIT 12400 Earl Jones Way Louisville, KY 40299 rev-a-shelf.com 800-626-1126 Zonas para orificios Indication pour les trou Instrucciones/ Instructions: 7.5” (190.5 mm) 1. Corte la parte inferior de la plantilla según el tipo de gabinete correcto. Couper le fond du gabarit qui correspond au type de placard. 2. Coloque la plantilla en el gabinete. A. Para que quede sin marco, alinéela al frente del gabinete. B. Para el marco frontal, alinéela al borde posterior del marco frontal.