Installation & Assembly

INSTALLATION INSTRUCTIONS: TOP MOUNT WASTE CONTAINER PULLOUTS
Release Lever
12400 Earl Jones Way
Louisville, KY 40299
rev-a-shelf.com
Customer Service: 800-626-1126
TOP MOUNT WASTE CONTAINER PULLOUT
I-4WCTMFL-0218
Remove wood frame from slides.
Pull frame out until slides are fully
extended, press black release lever
found in the middle of the slide, and
rmly pull frame completely away
from the slides (See Figure A).
STEP 1
Attach the slides to the cabinet
side walls. Using measurements
from Figure B, lay slides ush with
the front of the cabinet and attach
using #8 x 5/8” pan head screws.
STEP 2
TOOLS REQUIRED:
20 MIN
ESTIMATED ASSEMBLY TIME:
CARE AND MAINTENANCE:
Clean with a damp cloth and wipe
parts dry.
1
4
2
5
3
6 7
Figure A
Figure B
PARTS LIST
No. Description QTY.
1 Wood Frame w/ Slides & Door Mount Brackets 1
2 Waste Container(s) 1 or 2 (depending on unit purchased)
3 Rear Plastic Bin 1 (not included on all units)
4 #6 x 1/2” Flat Head Screws 6
5 #8 x 5/8” Flat Head Screws 6
6 #8 x 5/8” Pan Head Screws 10
7 Double Stick Tape 2
14-1/2” (369 mm)
Base of cabinet to
center of screw hole
(27 & 35 qt.
20-1/2” (369 mm)
Base of cabinet to
center of screw
hole (50 qt waste
container).