Manualshelf

Instructions / Assembly

ManualsBrandsRev-A-Shelf ManualsShop All Rev-A-ShelfRev-A-Shelf RL Series Cabinet Security Starter Set (5 Locks and 2 Keys)
12
DO NOT PEEL
No pele
Ne pas éplucher
9/32”
COMPONENTS
F. G. H. I.E.
DO NOT PEEL
No pele
Ne pas éplucher
9/32”
PEEL OFF
Pelar
Peel ici
C. D.A. B.
A. Template (double sided)
B. Lock Assembly
C. Lock Key
D. Striking Plate
E. Drill Bit Depth Gauge
F. Extension Slug
G. Plunger
H. Screws: #4 x 1/2” Pan Head Phillips
I. Unlocking Bar
TOOLS REQUIRED
INSTALLATION OVERVIEW
A. Power Drill
B. Phillips Screwdriver
C. Punch or Nail
D. 1-Drill Bit 9/32” (7mm)
E. 1-Drill Bit 1/16” (1.5mm Optional for pilot holes)
A. B. C. D. E.
DOOR THICKNESS
STEP 1
Peel narrow backing paper strip from Template’s
Lock Assembly side, ip over. Apply that side to
cabinet frame, the Template’s Striking Plate side
is facing out.
Fold template to the inside
top of the cabinet, using
the punch tool, mark the +
symbols.
DO NOT PEEL
No pele
Ne pas éplucher
9/32”
PEEL OFF
Pelar
Peel ici
STEP 2
Peel backing, close cabinet door rmly,
transferring template. The template will now
display the Lock Assembly icon
DO NOT PEEL
No pele
Ne pas éplucher
9/32”
Use components within arrows.
1/2” (13mm) – 5/8” (16mm)
5/8” (16mm) – 1 1/8” (29mm)
1 1/8” (29mm) – 1 9/16” (40mm)
Plastic Housing Insert
Plunger
Extension Slug
(once peeled, ip over to place)
(close door)
I-RLTL-0615

Summary of content (2 pages)