Installation Sheet

Customer Service: 800-626-1126 | rev-a-shelf.com
2
340mm
For 14” deep cabinet
Disengage the inner member
slides from the unit by pressing
the release trigger up and pulling
the pants rack unit away from the
inner member slide (See Figure 1).
Mount the inner slide members
to the cabinet; if using system
holes, attach them to the cabinet
sidewall using (4) M6 x 6mm euro
screws or measure, mark and pre-
drill (4) holes using a 1/8” drill bit
and attach using (4) #8-32 x 1/2”
wood screws (See Figure 2).
STEP 1
STEP 2
STEP 3
Slide the pants rack onto the inner
member slides, being sure to engage the
soft-close mechanism (See Figure 3).
FIG. 1
FIG. 3
FIG. 2
Front
1-15/32”
37 mm
1-15/64”
31 mm
7-9/16”
192 mm
5/64”
17 mm
350 mm
For 14” deep cabinet
1/16”
14 mm
1-11/32”
34 mm
Side View Back
1
8