Installation Sheet

ManualsBrandsRev-A-Shelf ManualsCabinet HardwareSidelines 24 Inch Pull Out Pants Rack with Soft Close

INSTALLATION INSTRUCTIONS: PANTS RACK

25 MIN

ESTIMATED ASSEMBLY TIME:

CARE AND MAINTENANCE:

Clean with a damp cloth and wipe

parts dry.

TOOLS REQUIRED:

WATCH TUTORIALS OF OUR

PRODUCTS BEING INSTALLED

WWW.REV-A-SHELF.COM/VIDEOS

12400 Earl Jones Way

Louisville, KY 40299

rev-a-shelf.com

Customer Service: 800-626-1126

PANTS RACK

PARTS LIST

No. Description Qty.

A Pants Rack 1

B #8 - 32 X 1/2” Wood Screws 4

C M6 X 6MM Euro Screws 4

I-PSCSL-0521

#2#2#2

#2#2

PZ2

Summary of content (4 pages)

PAGE 1
2400 Earl Jones Way Louisville, KY 40299 rev-a-shelf.com Customer Service: 800-626-1126 PANTS RACK TOOLS REQUIRED: 1 8 #2 PZ2 #2 ESTIMATED ASSEMBLY TIME: 25 MIN PARTS LIST CARE AND MAINTENANCE: Clean with a damp cloth and wipe parts dry. A No. Description Qty. A Pants Rack 1 B #8 - 32 X 1/2” Wood Screws 4 C M6 X 6MM Euro Screws 4 B C WATCH TUTORIALS OF OUR PRODUCTS BEING INSTALLED WWW.REV-A-SHELF.
PAGE 2
FIG. 1 STEP 1 Disengage the inner member slides from the unit by pressing the release trigger up and pulling the pants rack unit away from the inner member slide (See Figure 1). FIG. 2 STEP 2 Mount the inner slide members to the cabinet; if using system holes, attach them to the cabinet sidewall using (4) M6 x 6mm euro screws or measure, mark and predrill (4) holes using a 1/8” drill bit and attach using (4) #8-32 x 1/2” wood screws (See Figure 2).
PAGE 3
12400 Earl Jones Way Louisville, KY 40299 rev-a-shelf.com Customer Service: 800-626-1126 INSTRUCCIONES DE INSTALACIÓN / INSTRUCTIONS D’INSTALLATION PERCHERO PARA PANTALONES / PORTE-PANTALONS Herramientas requeridas: Outils Requis: 1 8 #2 PZ2 #2 Tiempo estimado de ensamblado: Durée de l’installation: 25 MIN Lista de Partes / Liste des Piéces CUIDADO/ ENTRETIEN: Limpie con un paño húmedo y seque las partes. Nettoyez avec un linge humide et essuyez les piéces pour les secher complétement. A No.
PAGE 4
PASO 1 / ÉTAPE 1 FIG. 1 Desenganche las correderas del miembro interior de la unidad presionando el gatillo de liberación hacia arriba y tirando de la unidad del perchero para pantalones lejos de la corredera del miembro interior (Ver Figura 1). Dégagez les glissières des membres internes de l’unité en appuyant sur la gâchette de dégagement vers le haut et en tirant le porte-pantalons pour l’éloigner des glissières des membres internes (voir la figure 1). FIG.