Installation Sheet

INSTALLATION
INSTRUCTIONS
SOFT-CLOSE
MIXER LIFT DAMPENER
12400 Earl Jones Way, Louisville, KY 40299
[phone] | www.rev-a-shelf.com
TOOLS REQUIRED:
ESTIMATED ASSEMBLY
TIME:
15 MIN
CARE AND MAINTENANCE:
CLEAN WITH A DAMP CLOTH
AND WIPE PARTS DRY.
1/2”
Description QTY
A
Dampeners
2
B
Ball Studs
4
C
Lock Washers
4
D
Retaining Clips
4
A
B C D
NOTE: IT IS VERY IMPORTANT THAT YOU FOLLOW THESE DIRECTIONS CAREFULLY. THE FIXED
CYLINDER END OF THE DAMPENER MUST BE INSTALLED AT THE TOP LOCATION FOR
LUBRICATION OF THE DAMPENER TO MAINTAIN PROPER FUNCTION. THE RETAINING CLIPS
MUST BE USED FOR SAFE OPERATION OF THE ASSEMBLY.
1) Put (2) lock washers on the threaded end of
(2) ball studs, screw into the arm assembly of the
mixer lift and then tighten with a ½” wrench.
2) Pull the ends of the dampener apart
about ½”. (This will be slightly dicult due
to the dampening eect of the cylinder.)
*FOR EXISTING MIXER LIFT, GO TO PAGE 3.
1
I-MLHDSC-TRI-0415