Installation Instructions

Customer Service: 800-626-1126 | rev-a-shelf.com
2
Place the cover cap over the
indicator hole (See Figure 5).
STEP 2
STEP 4
STEP 3
FIG. 2
FIG. 3 FIG. 4
D-Shape start position
D-Shape
Kidney-Shape start position
Kidney-Shape
Kidney-Shape
Tribase
Install the shelf by tilting it in a
diagonal position, then ease it
through the cabinet opening
and place it against the cabinet
oor (See Figure 2).
Ensure tribase (back plate) is
locked into correct position.
You will hear a distinct click
when locked into place.
(See Figure 1).
Note: Does not apply to full
circle trays.
STEP 1
FIG. 1
For full circle and D-Shape
shelves rotate the shelf, using
the pre-drilled hole, locate
the rst bearing mounting
location and afx the shelf to
the cabinet oor with (1) #8 x
1- 1/4” at head screw (See
Figure 3).
Note: Because of the stop on
D-Shape and Kidney shelves,
apply pressure to the top of
the shelf before rotating.
For Kidney-Shape shelves,
apply pressure and rotate the
shelf until you see the rst
bearing mounting location by
the bird’s mouth then afx the
shelf to the cabinet oor with
(1) #8 x 1- 1/4” at head screw
(See Figure 4).
For ALL shelves repeat
rotating until the remaining (3)
#8 x 1- 1/4” at head screws
are installed, and the unit is
secured to the cabinet oor.
#2#2#2
FIG. 5