Use and Care Manual

Customer Service: 800-626-1126 | rev-a-shelf.com
2
Determine which direction the unit
is being mounted. If the rack needs
to switch directions, unscrew the 2
screws that attach the rack to the
pop out mechanism. Reverse the
rack to the desired direction and
secure it back onto the pop out
mechanism. (See Figure 1).
Use (2) M6 x 6 mm Euro Screws if
using the system holes to secure
the deluxe sliding rack to the
cabinet (See Figure 2A).
Measure, mark, and pre-drill (2)
holes for the deluxe sliding rack,
if not using system holes. Use
(2) #8-32 x 1/2” wood screws to
secure the deluxe sliding rack to
the cabinet (See Figure 2B).
Note: Before pre-drilling, be sure
that your hole locations are level.
STEP 1
STEP 2
STEP 3
Product is ready for use
(See Figure 3).
FIG. 1
FIG. 3
FIG. 2
Belt Rack
Screws Screws
Tie Rack
#2#2#2
1
8