Owner manual

TOOLS REQUIRED: ESTIMATED ASSEMBLY TIME: CARE AND MAINTENANCE:

5 MIN

Clean with a damp cloth and

wipe parts dry.

PARTS LIST:

EURO SCREW

FOR SYSTEM HOLES

WOOD SCREW

SLIDE

BELT RACK

INSTALLATION INSTRUCTIONS

Before beginning assembly, installation or operation of the product make sure all parts are present.

Contact customer service for replacement parts - (800) 626-1126.

BELT RACK

For left hand

applications

Remove acorn nuts,

rotate face plate 180

degrees, reattach and

tighten acorn nuts.

2409 Plantside Dr.

Jeersontown, KY 40299

800.626.1126 • www.rev-a-shelf.com

I-BRC-1011

NOTE: If back system hole does not match slide hole pattern,

use wood screw instead.

PAGE 1
BELT RACK INSTALLATION INSTRUCTIONS TOOLS REQUIRED: ESTIMATED ASSEMBLY TIME: CARE AND MAINTENANCE: 5 MIN Clean with a damp cloth and wipe parts dry. PARTS LIST: X2 X2 EURO SCREW (FOR SYSTEM HOLES) SLIDE WOOD SCREW BELT RACK Before beginning assembly, installation or operation of the product make sure all parts are present. Contact customer service for replacement parts - (800) 626-1126. NOTE: If back system hole does not match slide hole pattern, use wood screw instead.
PAGE 2
INSTALLATION D’UN SUPPORT DE CEINTURECINTURÓN DE RACK OUTILS NÉCESSAIRES: HERRAMIENTAS NECESARIAS: TEMPS ESTIMÉ DU MONTAGE: ESTIMAR EL TIEMPO DE MONTAJE: 5 MIN ENTRETIEN ET MAINTENANCE: CUIDADO Y MANTENIMIENTO: Utilisez un chiffon humide et essuyer. Utilice un paño húmedo y seque.