Installation Instructions

11) Repeat for other side of sink front panel and nally attach your trays and tighten down.
8) Using the provided (4) truss head screws attach the hinge to your sink front panel. Paying attention that there is a left and right hinge.
Repeat if you have a second sink front panel.
9) Using (2) truss head screws attach as shown, but do not tighten all the way down as you will need to attach your sink tray(s) to these.
10) Take the entire sink front panel and line it up with your cabinet opening while extending the hinge.
Attach hinge to face frame using provided at head screws.
NOTE: the hinges have slotted holes in case you need to micro-adjust sink panel left or right
NOTE: Using a screwdriver is recommended, but a drill is acceptable if holes are properly pre-drilled.