Instructions / Assembly

Customer Service: 800-626-1126 | rev-a-shelf.com
2
⁄”
[20mm]
⁄”
[20mm]
2
⁄”
(54mm)
6
⁄”
(160mm)
2
⁄”
(54mm)
6
⁄”
(160mm)
9 ⁄”
(246mm)
Center line of cabinet
For 24” unit For 36” unit
15 ⁄”
(396mm)
9 ⁄”
(246mm)
For 24” unit For 36” unit
15 ⁄”
(396mm)
Please refer to gure 1a, mark
and drill pilot holes for the
bottom mounting.
Mount the bottom mount
brackets to the cabinet oor
using qty (10) #8 wood screws.
For heavy applications, it is
recommended to add 1/4” bolts
thru the brackets and cabinet
oor.
NOTE
24” shelf - inside cabinet width
must be between 22-1/4” to 22-
3/8” [564-568mm].
36” shelf - inside cabinet width
must be between 34” to 34-3/16”
[864-868mm].
STEP 1
Please refer to gure 1b, mark
and drill pilot holes for the side
mounting.
Mount the side frames to the
walls of the cabinet using qty (8)
#5 wood screws (Figure 2a).
NOTE
For side mounting, this is
designed for a frameless cabinet
application.
When side mounting into a Face
Frame cabinet, depending on
your cabinet construction such
as, Face Frame width, hinge
style, and location, a scab board
may be required.
STEP 2
Bottom Mounting
Side Mounting
Front of Cabinet
5PD-24CR = 22-9/32” (566mm)
5PD-36CR = 34-1/8” (866mm)
5/8”
(16)
8-7/16” (214mm)
2-1/8” (54)
1/2”
(13)
min. 18-7/8” (480mm)
FIG.
1a
FIG.
2a
FIG.
1b
#5 Wood Screws
#1, 1/4” bolt
#2, 1/4” cap nut
#3, washer
#5 Wood Screws
(2mm)
(6mm)
Optional tool
(only if using the
1/4” bolts)
1
4
3
32
(2mm)
#2
min. 18-7/8” (480mm)
3
32
Front of Cabinet