Instructions / Assembly

6) Use the (4) ¾” wood screws to attach U-shaped supports into oor
of the cabinet.
5) Using the provided ½” wood screw, attach slide to face frame of cabinet while making sure that the front of the slide is ¼” back
from the opening.
1/4”
8) Carefully re-engage the baskets into the slides. Be
careful not to force the baskets into the slides as this
could cause damage.
9) Attach your wire dividers to your lower basket. Slide them left or right
to accomdate your dierent sizes of cookware.
(Note: if installing into a frameless application you can simply use the same ½” screw and install into the side wall of the cabinet.)
Part #
CO-21C-2-5
5CW2-2122-CR
Shown
7) Push the (2) rear metal sockets to the rear of the cabinet and attach both
sides using the (2) ½” wood screws.
This will ensure complete stability of your baskets.
Note: To ensure optimal
performance it is
recommended that the rear
sockets are perfectly aligned.