Instructions / Assembly

Customer Service: 800-626-1126 | rev-a-shelf.com
6
Insert the Door Frame with
door attached into the Swivel
Frame as shown. Secure using
2 of the M6x12mm button
head screws (See Fig 9).
NOTE: Door adjustments
can be made at the end of
installation.
Open your unit to the desired
position. After removing the
pre-assembled stopper screw
from its accompanying pieces,
place the bottom piece of the
Stopper Screw in front of the
black bumper, underneath
the Connector’s slot (See Fig
10). Place the remaining two
pieces on top of the Connector
and secure with the removed
screw.
FIGURE 9
FIGURE 10
STEP 9
ATTACHING CABINET
DOOR (CONT’D)
M6x12MM
BUTTON HEAD
SCREWS
STEP 10
STOPPER
SCREW
ASSEMBLY
#2