Instructions / Assembly

Customer Service: 800-626-1126 | rev-a-shelf.com
4
With the Swivel Frame in the
open position, locate the
two holes on the backside of
the frame. Using the 2 M4x6
Machine Screws, attach the
Handle Bracket. See Figure
5 for the Handle Bracket’s
installation position.
NOTE: leave unit in the open
position for step 6.
Remove the screw from the
black bumper on the Support
Arm and set pieces to the
side. Place the Support Arm
on top of Handle Bracket and
secure using the M5x8mm
screw (See Fig 6A). Place the
opposite end of the Support
Arm under the slotted portion
of the Connector, re-attach
the black bumper pieces with
the removed screw from the
beginning of this step and
secure. (See Fig 6B)
FIGURE 5
FIGURE 6A FIGURE 6B
M5x8MM
SCREW
BUMPER
PIECES
BUMPER
PIECES
STEP 5
ATTACHING THE
FRAME (CONT’D)
2/3
10-3/4”
7-9/16”
14-11/16”
7-9/16”
1/2”
Between
15-24”
STEP 6
2 M4x6MM
MACHINE
SCREWS
HANDLE
BRACKET
#2