Installation Sheet

Customer Service: 800-626-1126 | rev-a-shelf.com
6
Insert the door frame with
door attached into the swivel
frame as shown. Secure using
(2) M6x12 mm button head
screws. (Fig. 9)
NOTE: Door adjustments
can be made at the end of
installation.
Open your unit to the desired
position. After removing the
pre-assembled stopper screw
from its accompanying pieces,
place the bottom piece of the
stopper screw in front of the
black bumper, underneath
the connector’s slot. Place the
remaining two pieces on top of
the connector and secure with
the removed screw. (Fig. 10)
STEP 9
20180612-1
Step 5.
Step 6.
3/3
Step 7.
Step 10.
Step 8.
Step 9.
M6x12 mm
Button head screws
STEP 10
20180612-1
Step 5.
Step 6.
3/3
Step 7.
Step 10.
Step 8.
Step 9.
Stopper
screw
assembly
#2
FIG.
9
FIG.
10